Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Green ATX mid-tower with tempered glass side panel and micro mesh front

HYTE

HYTE CS-HYTE-X50G-MM ATX Mid-Tower PC Case — Matcha Milk (Green)

SKU CH-NHS9-HZSMS MPN CS-HYTE-X50G-MM

ATX mid-tower with micro-mesh intake, louvered exhaust, acoustic glass and top-mounted PSU canopy for direct GPU airflow

  • TypeATX Mid Tower
  • ColorGreen
  • Case MaterialABS / Steel / Tempered Glass
  • Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
  • Side Panel1 x Side Tempered Glass Panel
  • Dust FiltersBottom

Option Glass (Green)

Зачертаните версии съществуват, но не се предлагат тук.

  • Low-pressure micro-mesh intake keeps temperatures down
  • Louvered blade vents cut exhaust resistance for quieter operation
  • 4 mm laminated acoustic glass dampens internal noise
  • Top-mounted PSU canopy simplifies cable routing with gravity
  • Cold-floor design directs fresh air straight to the GPU

Modern Performance ATX Mid-Tower

The HYTE X50 in Matcha Milk is a mid-tower chassis built for ATX, E-ATX, Micro-ATX and ITX motherboards. Its green ABS, steel and tempered-glass construction targets builders who want a distinctive look without sacrificing internal space. The case provides one 3.5-inch bay, two 2.5-inch bays and seven expansion slots for graphics cards and add-in boards. Buyers who need more than one 3.5-inch drive or a smaller footprint should look elsewhere.

Full-Coverage Micro Mesh & Louvered Blade

A full-coverage micro mesh front panel creates a low-pressure, low-resistance intake path, while patent-pending louvered blade vents on the rear and side reduce exhaust impedance and add chassis rigidity. Up to three 120 mm fans can be mounted at the front, three at the side and one at the rear, though no fans are pre-installed. The 4 mm laminated acoustic glass side panel includes a shatter-resistant bonding layer that dampens transmitted noise. CPU coolers up to 180 mm tall are supported.

Cold-Floor GPU Cooling & Structural PSU Canopy

The top-mounted PSU canopy leaves the floor open so up to 360 mm of fresh intake air travels straight to the graphics card when side fans are fitted. Meticulously placed tie-down points and routing channels inside the canopy simplify cable management by letting wires hang with gravity. The package includes the tempered-glass side panel and a bottom dust filter; no fans, fan controllers or RGB hardware are bundled. Builders who want pre-installed cooling or integrated lighting must add those separately.

Акценти

  • Low-pressure micro-mesh intake keeps temperatures down
  • Louvered blade vents cut exhaust resistance for quieter operation
  • 4 mm laminated acoustic glass dampens internal noise
  • Top-mounted PSU canopy simplifies cable routing with gravity
  • Cold-floor design directs fresh air straight to the GPU

Спецификации

BrandHYTE
ModelCS-HYTE-X50G-MM
TypeATX Mid Tower
ColorGreen
Case MaterialABS / Steel / Tempered Glass
Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
Side Panel1 x Side Tempered Glass Panel
Dust FiltersBottom
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Expansion Slots7
Fan OptionsFront - 3 x 120mm / Rear - 1 x 120mm / Side - 3 x 120mm
Pre-installed FansNo Fan Installed
Max CPU Cooler Height180 mm
Тегло на пратката9.07 kg
Размери на опаковката635 × 508 × 483 mm

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

How do I install the front micro-mesh panel, and what step do people skip?

The front panel pulls off to expose the three 120 mm mounting points; the step most builders miss is seating the magnetic dust filter flush before snapping the mesh back on.

What maintenance or replacement will the case need over time?

Only the bottom dust filter needs periodic cleaning; no fans are pre-installed so you choose and replace any 120 mm units yourself.

What thermal limit appears first during a long gaming session?

The CPU cooler height is capped at 180 mm, so a taller tower cooler will hit the side glass before the GPU hits its 360 mm intake limit.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.