IBM
IBM 49Y1565 16GB DDR3 1333 ECC Registered 1.35V 240-pin server RAM
16GB DDR3 ECC registered DIMM running at 1333 MHz with 1.35V low-voltage operation for compatible IBM System x servers
- Capacity16GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- 16 GB DDR3 capacity for high-density server workloads
- 35 V low-voltage operation reduces power draw
- ECC registered design protects data integrity
- 1333 MHz CL9 speed matches PC3-10600 standard
- Compatible with IBM System X3550 M3 and X3650 M3 servers
What this module is
The IBM 49Y1565 is a 16GB DDR3 SDRAM DIMM built for System x servers. It runs at 1333 MHz with CL9 latency and a low 1.35V operating voltage. ECC and registered signal processing provide the data integrity required in enterprise environments.
Who it suits and who it does not
This module fits administrators upgrading or repairing IBM System x3550 M3 7944 and x3650 M3 7945 servers that accept 240-pin registered DIMMs. Buyers needing a different pin count, unbuffered memory or a non-ECC configuration cannot use this part.
Deciding specification
The registered ECC design combined with 1.35V DDR3 1333 operation determines compatibility; only systems qualified for this exact electrical and signalling profile will accept the module.
Акценти
- 16 GB DDR3 capacity for high-density server workloads
- 35 V low-voltage operation reduces power draw
- ECC registered design protects data integrity
- 1333 MHz CL9 speed matches PC3-10600 standard
- Compatible with IBM System X3550 M3 and X3650 M3 servers
Спецификации
| Brand | IBM |
|---|---|
| Model | 49Y1565 |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Тегло на пратката | 0.23 kg |
| Размери на опаковката | 178 × 51 × 13 mm |
Въпроси за този артикул
How much heat does the 16 GB 1.35 V DDR3 registered DIMM add when the server runs continuously?
The module operates at 1.35 volts, which is lower than standard 1.5 V DDR3, so it contributes less heat per gigabyte during sustained workloads.
What must the system provide to use this 240-pin DDR3 ECC registered module?
A server motherboard with 240-pin DDR3 slots that support registered ECC memory and can supply 1.35 V at 1333 MHz.
Will the 1333 MHz CL9 stick work in an IBM System X3550 M3 7944 or X3650 M3 7945 alongside existing memory?
The module is listed as compatible with those systems; it will run at the speed and voltage supported by the platform and the other installed DIMMs.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



