Intel
Intel SSDSC2KB240G801 D3-S4510 240GB 2.5" SATA enterprise SSD
- 2.5"
- 240GB
138,99 щ.д.
0.00176211BTC
В наличност
Intel
Intel SSDSC2KB019T801 D3-S4510 1.92TB 2.5" SATA enterprise SSD
A 2.5 inch SATA enterprise SSD delivering 560 MBps reads and 510 MBps writes with 7.1 PBW endurance and AES 256-bit encryption
- Form Factor2.5"
- Capacity1.92TB
- Memory Components3D NAND TLC
- InterfaceSATA III
- Max Sequential ReadUp to 560 MBps
- Max Sequential WriteUp to 510 MBps
Зачертаните версии съществуват, но не се предлагат тук.
- 92 TB capacity stores large read-intensive datasets
- 560 MB/s sequential read speeds accelerate workload completion
- 1 PBW endurance rating supports sustained write operations
- AES 256-bit hardware encryption protects data at rest
- 5-inch 7 mm form factor fits legacy SATA infrastructure
1.92 TB SATA enterprise SSD
The Intel D3-S4510 is a 2.5 inch solid-state drive built for read-intensive server workloads. It uses 64-layer 3D NAND TLC to deliver 1.92 TB of capacity in a 7 mm z-height. The drive targets operators who want to replace mechanical disks without changing their existing SATA infrastructure.
SATA III interface limits
The SATA 600 interface caps sequential throughput at 560 MBps read and 510 MBps write. Random performance reaches 97,000 IOPS read and 35,500 IOPS write with 36 µs read latency and 37 µs write latency. These figures define the practical ceiling for any drive on this bus.
Replaces 2.5 inch hard drives
The SSD is a direct drop-in upgrade for 2.5 inch HDDs in legacy bays and backplanes. It brings 7.1 PBW endurance, AES 256-bit encryption, enhanced power-loss data protection and end-to-end data protection. The jump is worth it when lower power draw, silent operation and higher reliability matter more than raw capacity per pound.
Акценти
- 92 TB capacity stores large read-intensive datasets
- 560 MB/s sequential read speeds accelerate workload completion
- 1 PBW endurance rating supports sustained write operations
- AES 256-bit hardware encryption protects data at rest
- 5-inch 7 mm form factor fits legacy SATA infrastructure
Спецификации
| Brand | Intel |
|---|---|
| Series | D3-S4510 |
| Model | SSDSC2KB019T801 |
| Part Number | SSDSC2KB019T801 |
| Form Factor | 2.5" |
| Capacity | 1.92TB |
| Memory Components | 3D NAND TLC |
| Interface | SATA III |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 510 MBps |
| 4KB Random Read | Up to 97,000 IOPS |
| 4KB Random Write | Up to 35,500 IOPS |
| Read Latency | 36 µs |
| Write Latency | 37 µs |
| MTBF | 2,000,000 hours |
| Features | Endurance Rating (Lifetime Writes): 7.1 PBW Enhanced Power Loss Data Protection: Yes Hardware Encryption: AES 256-bit Temperature Monitoring and Logging: Yes End-to-End Data Protection: Yes Compatible with existing SATA setups for an easy storage upgrade Up to 6x lower power and lower cooling requirements than 2.5-inch HDDs 3.2x more data in the same amount of space Up to 4.2x lower annualized failure rates (AFR) for fewer drive replacements Up to 300x more IOPS/TB than HDDs |
| Power Consumption (Idle) | 1.1W |
| Power Consumption (Active) | 3.2W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000G / 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS Non-Operating: 3.13 GRMS |
| Height | 7.00mm |
| Width | 5.750 |
| Weight | 0.26 |
| Тегло на пратката | 0.12 kg |
| Размери на опаковката | 136 × 108 × 9 mm |
Други версии на този модел
4 още от същата серия
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Intel
Intel D3-S4510 SSDSC2KB480G801 480GB 2.5" SATA enterprise SSD
- 2.5"
- 480GB
185,99 щ.д.
0.00235798BTC
В наличност
Intel
Intel SSDSC2KB960G801 D3-S4510 960GB 2.5" Sata enterprise SSD
- 2.5"
- 960GB
188,99 щ.д.
0.00239601BTC
В наличност
Intel
Intel D3-S4510 3.84TB 2.5" SATA Enterprise SSD SSDSC2KB038T801
- 2.5"
- 3.84TB
835,99 щ.д.1 152,99 щ.д.−27%
0.01059865BTC
В наличностВъпроси за този артикул
Should I pick the 1.92TB D3-S4510 or the D3-S4610 for read-heavy server workloads?
The D3-S4510 is built for read-intensive workloads with 560 MBps sequential read and 97,000 IOPS random read; the D3-S4610 offers higher write endurance if your mix shifts toward more writes.
What does the 560 MBps sequential read mean once the drive is installed in a SATA III server?
In a SATA III system the drive can sustain up to 560 MBps on large sequential reads, limited by the 600 MBps interface ceiling and the 36 µs read latency.
How does the SATA III interface cap real-world performance of this 2.5" SSD?
The SATA III link tops out at 600 MBps, so the drive's 560 MBps read and 510 MBps write sit near the bus limit; random IOPS reach 97,000 read and 35,500 write within that bandwidth.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
