Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Black USB 3.0 adapter with SATA and dual IDE connectors plus USB A and USB C ports

Jansicotek

Jansicotek E19 USB 3.0 to SATA IDE USB C adapter with USB A port and 12V 2A power

SKU CH-VNVZ-FD2G9

Connects 2.5" and 3.5" SATA or IDE drives plus optical drives to USB 3.0 with simultaneous three-drive support and included 12V 2A power

  • ColorBlack
  • Changer TypeUSB to IDE&SATA
  • SpecificationsAll in One Solution to Connect to Different Types of Interfa
  • Package ContentsAll in One Solution to Connect to Different Types of Interfa
  • Connect 2.5in or 3.5in SATA and IDE drives via USB 3.0
  • Power 3.5in drives externally with included 12V 2A adapter
  • Access three drives simultaneously through dual IDE and SATA connectors
  • Plug-and-play on Windows, Mac and Linux without driver installation
  • Transfer data at up to 5Gbps with USB 3.0 backward compatibility

Universal 2.5/3.5 inch SATA IDE adapter

This Jansicotek E19 adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port. It also supports 5.25in optical drives such as DVD-ROM, CD-ROM, CD-RW, DVD-RW and DVD+RW. The dual-head IDE connector uses 40pin and 44pin interfaces alongside one SATA III connector. It is compatible with Windows Vista, 7, 8.1, 10, 11, Mac OS and Linux without requiring a driver.

Passive cooling with external 12V 2A power

The unit relies on passive cooling and draws power from the included 12V 2A external power adapter for 3.5in drives and optical devices. A 4pin power cable is supplied to feed the drive directly. Because no fan is present, operation is silent during normal use. The adapter maintains backward compatibility with USB 2.0 and USB 1.1 ports.

Three simultaneous drives and plug-and-play recovery

The bundled 12V 2A power adapter, 4pin power cable and the adapter itself allow up to three hard disk drives to be connected at the same time. This enables straightforward data retrieval, backup, cloning and recovery workflows. No driver installation is needed on supported operating systems, so the hardware is ready to use immediately after connection.

Акценти

  • Connect 2.5in or 3.5in SATA and IDE drives via USB 3.0
  • Power 3.5in drives externally with included 12V 2A adapter
  • Access three drives simultaneously through dual IDE and SATA connectors
  • Plug-and-play on Windows, Mac and Linux without driver installation
  • Transfer data at up to 5Gbps with USB 3.0 backward compatibility

Спецификации

BrandJansicotek
ModelE19
ColorBlack
Changer TypeUSB to IDE&SATA
SpecificationsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Supports drives with a capacity
Package ContentsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
No Drive Needed for Windows, Mac and Linux, Chrome
the included external power adapter will allow you to power your drives outside without opening your case. the plug and play function with no driving need, features works wonder with Windows and OSX saving your time and trouble,

Въпроси за този артикул

How do I connect a 3.5" IDE drive to the Jansicotek E19 without it failing to appear?

Use the 40-pin IDE connector and the 4-pin power cable, then plug in the 12V 2A adapter before connecting the USB 3.0 cable to the computer.

Which parts of the Jansicotek E19 are most likely to wear out and need replacing?

The 4-pin Molex power cable and the USB 3.0 cable see the most plug cycles; the 12V 2A power brick can also degrade after years of continuous use.

What transfer-speed limit will I hit first when copying large batches of files with the Jansicotek E19?

The USB 3.0 interface caps sustained throughput at 5 Gbps, so mechanical drive speed or that bus ceiling will be the bottleneck.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.