JONSBO C6 White Micro ATX Mesh PC Case
- Micro ATX / Mini-ITX
- White
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
JONSBO
Micro-ATX steel chassis with mesh panels, tool-free panels, one 3.5-inch and two 2.5-inch bays, 255 mm GPU limit, 75 mm cooler limit, 185 mm PSU limit
Options C6 Handle Black
The JONSBO C6 HANDLE is a steel Micro ATX and Mini-ITX case finished in black. Its integrated top handle makes it simple to move between desks or LAN events. The compact footprint suits builders who want a tidy desktop tower without a full-size ATX layout. Mesh panels on every side keep airflow unrestricted for the supported hardware.
Thumb screws and captive panels are gone; the top cover and both side panels lift off without tools. This speeds up drive swaps, fan changes or a quick dust-out. The jump is worth it for anyone who opens their case more than once a year, while builders who never touch internals after the first build will see less benefit.
The CPU cooler height maxes out at 75 mm, so only low-profile air coolers or thin AIO cold plates will fit. Power supplies longer than 185 mm cannot be mounted. Graphics cards up to 255 mm are supported, but the single 120 mm or 140 mm fan slots at front, top and bottom restrict total airflow capacity for high-wattage parts.
| Brand | Jonsbo |
|---|---|
| Type | Micro ATX / Mini-ITX |
| Color | Black |
| Case Material | Steel |
| Motherboard Compatibility | Micro ATX / Mini ITX |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Front Ports | Type-C(20PIN)/USB3.0*1/AUDIO*1+MIC*1(Headset+mic combined) |
| Fan Options | Bottom - 1 x 120mm / Bottom - 1 x 140mm / Front - 1 x 120mm / Top - 1 x 120mm / Top - 1 x 140mm |
| Max GPU Length | 255 mm |
| Max CPU Cooler Height | 75 mm |
| Max PSU Length | 185 mm |
| Dimensions | 202mm(W) x266mm(D)x295.2mm(H) (Include the footpad) |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
The case allows a maximum CPU cooler height of 75 mm, so measure from the motherboard surface to the side panel and ensure your cooler is 75 mm or shorter.
There are no screws; lift the top cover straight up, then slide the side panel rearward to release the tool-free latches.
Vacuum or brush the front, top and bottom mesh every three to six months, or whenever dust buildup becomes visible, to maintain airflow to the 120 mm and 140 mm fan positions.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?