Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Green circuit board with black memory chips and gold 184-pin edge connector

Kingston Technology Corp.

Kingston Technology Corp. KTM8854/1G 1GB 184-Pin DDR SDRAM PC2700 memory upgrade

SKU CH-4R28-T1Z39

1GB DDR SDRAM module for compatible IBM systems, 184-pin PC2700 unbuffered at 2.50V

  • Capacity1GB
  • Type184-Pin DDR SDRAM
  • SpeedDDR 333 (PC 2700)
  • Voltage2.50V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 1GB capacity for expanded system memory
  • DDR 333 PC2700 speed for compatible bandwidth
  • 184-pin DIMM fits designated IBM desktops
  • Unbuffered non-ECC design matches original spec
  • 50V operation aligns with platform requirements

1GB DDR 333 system-specific memory for IBM

This 1GB 184-pin DDR SDRAM module runs at PC2700 speed with a 2.50V supply. It is built for IBM systems that require unbuffered non-ECC memory. The part matches IBM FRU 41P6812 and part numbers 31P8857 and 31P9123. Buyers needing ECC or registered DIMMs should look elsewhere.

Thermals noise and power draw in normal use

The module operates at the standard DDR 333 voltage of 2.50V without a heat spreader. As an unbuffered DIMM it draws only the power required by the memory chips themselves. No active cooling or fan is included and none is specified by the manufacturer. Acoustic output is therefore limited to the system's own airflow.

What the bundled accessories

No accessories, cables, brackets or software utilities are included with this memory upgrade. The package contains only the DIMM itself. Installation is a direct mechanical fit into a compatible 184-pin slot. No driver or configuration tool is required or provided.

Акценти

  • 1GB capacity for expanded system memory
  • DDR 333 PC2700 speed for compatible bandwidth
  • 184-pin DIMM fits designated IBM desktops
  • Unbuffered non-ECC design matches original spec
  • 50V operation aligns with platform requirements

Спецификации

BrandKingston
ModelKTM8854/1G
Capacity1GB
Type184-Pin DDR SDRAM
SpeedDDR 333 (PC 2700)
Voltage2.50V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
Compatible SystemIBM
FeaturesCompatible:
31P8857 (IBM); 31P9123 (IBM); FRU 41P6812 (IBM)

Въпроси за този артикул

How do I install the 184-pin DDR SDRAM module in my IBM system, and what step is often missed?

Power off the system, open the case, align the notch on the 184-pin module with the slot key, press firmly until both retention clips click, then verify 1GB is detected in BIOS.

What maintenance or replacement will this DDR 333 module need over time?

No scheduled maintenance is required; if errors appear, reseat the module or replace it with another PC2700 2.50V unbuffered DIMM matching the original specifications.

What limit appears first when this memory runs under sustained load?

The DDR 333 (PC2700) data rate and 2.50V voltage set the maximum sustained throughput; thermal throttling is not a factor without a heat spreader.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.