Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Black USB 3.0 to SATA IDE adapter cable with 12V power supply

LUOM

LUOM E19 IDE SATA USB 3.0 Hard Drive Adapter Black

SKU CH-F2XB-WJAFW

Connects 2.5" or 3.5" SATA and IDE drives to USB 3.0 with 5 Gbps transfer, dual IDE connectors and 12 V power adapter

  • ColorBlack
  • Changer TypeUSB to IDE&SATA
  • SpecificationsAll in One Solution to Connect to Different Types of Interfa
  • Package ContentsAll in One Solution to Connect to Different Types of Interfa
  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with UASP acceleration
  • Works with Windows, Mac OS and Linux without drivers
  • Powers 3.5" drives using included 12 V 2 A adapter
  • Dual 40-pin and 44-pin IDE connectors plus SATA III port

Universal Drive Adapter

The LUOM E19 connects 2.5 and 3.5 inch SATA or IDE hard drives and optical drives to a USB 3.0 port. It includes dual-head IDE connectors for 40-pin and 44-pin devices plus a SATA connector. A 12 V 2 A power adapter supplies larger drives. Plug-and-play operation works without driver installation on Windows, Mac OS and Linux.

Who It Suits

Technicians and hobbyists who need quick access to legacy IDE or SATA drives for data recovery, imaging or formatting will find the all-in-one cable convenient. It is not for users who require an internal drive installation or a permanent external enclosure. It also cannot serve drives that demand a faster host interface than USB 3.0.

Transfer Speed Decides

The adapter reaches 5 Gbps over USB 3.0 with UASP support and falls back to USB 2.0 or 1.1 when needed. If your workflow depends on sustained throughput above that rate, this adapter will not meet the requirement.

Акценти

  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with UASP acceleration
  • Works with Windows, Mac OS and Linux without drivers
  • Powers 3.5" drives using included 12 V 2 A adapter
  • Dual 40-pin and 44-pin IDE connectors plus SATA III port

Спецификации

BrandLUOM
ModelE19
ColorBlack
Changer TypeUSB to IDE&SATA
SpecificationsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Supports drives with a capacity
Package ContentsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
No Drive Needed for Windows, Mac and Linux, Chrome
the included external power adapter will allow you to power your drives outside without opening your case. the plug and play function with no driving need, features works wonder with Windows and OSX saving your time and trouble,

Въпроси за този артикул

What does the 5 Gbps transfer rate mean when I connect a SATA III drive?

The adapter uses USB 3.0 with UASP support, so a SATA III drive can reach the full 5 Gbps link speed; actual throughput depends on the drive and host controller.

Which USB standard does the adapter use and what limits apply?

It connects via USB 3.0 and is backward compatible with USB 2.0 and 1.1; the 5 Gbps ceiling is set by the USB 3.0 interface.

What power and connectors are needed to run a 3.5" IDE drive?

The kit includes a 12 V 2 A AC adapter and a 4-pin Molex cable; both must be connected for 3.5" IDE drives, while 2.5" drives draw power from USB.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.