Micron Technology, Inc.
Micron Technology, Inc. MTFDDAK1T0TBN-1AR1ZA 2.5" 1TB SATA internal SSD
A 2.5 inch SATA solid-state drive storing 1TB on 3D NAND with sequential speeds up to 530 MBps read and 500 MBps write
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form Factor2.5"
- Capacity1TB
- Memory Components3D NAND
- InterfaceSATA III
- 1TB capacity for ample storage
- SATA III interface delivers up to 530 MBps sequential read speed
- 3D NAND technology enables up to 500 MBps sequential write speed
- 92,000 IOPS random read for responsive multitasking
- 5 million hours MTTF for long-term reliability
Micron 1100 Series 1TB SATA SSD
The Micron 1100 Series delivers a 1TB internal solid state drive in a 2.5 inch form factor. It uses 3D NAND flash and a Marvell controller to provide consumer storage for laptops and desktops. The SATA III interface ensures broad compatibility with existing systems.
Sustained workload behaviour
Sequential reads reach up to 530 MBps and sequential writes up to 500 MBps under load. Random performance is rated at 92,000 IOPS for 4KB reads and 83,000 IOPS for 4KB writes. The drive operates between 0°C and 70°C with a 1.5 million hour MTTF rating.
Upgrade context from hard drives
Replacing a mechanical hard drive with this SSD removes moving parts and cuts access latency dramatically. The jump is worth it when faster boot times, quicker application launches and smoother multitasking are priorities. The 1TB capacity matches common 1TB hard drive sizes for a direct swap.
Акценти
- 1TB capacity for ample storage
- SATA III interface delivers up to 530 MBps sequential read speed
- 3D NAND technology enables up to 500 MBps sequential write speed
- 92,000 IOPS random read for responsive multitasking
- 5 million hours MTTF for long-term reliability
Спецификации
| Brand | Micron |
|---|---|
| Series | 1100 Series |
| Model | MTFDDAK1T0TBN-1AR1ZA |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Controller | Marvell |
| Max Sequential Read | Up to 530 MBps |
| Max Sequential Write | Up to 500 MBps |
| 4KB Random Read | Up to 92,000 IOPS |
| 4KB Random Write | Up to 83,000 IOPS |
| MTTF | 1,500,000 hours |
| Operating Temperature | 0°C ~ +70°C |
| Height | 7.00mm |
| Width | 69.85mm |
| Depth | 100.00mm |
| Weight | 56.00g |
| Тегло на пратката | 0.10 kg |
| Размери на опаковката | 127 × 127 × 25 mm |
Въпроси за този артикул
How much heat does the 1TB 2.5" SATA III drive generate when running continuously?
The drive is rated for an operating temperature range of 0°C to 70°C and uses 3D NAND with a Marvell controller designed for power efficiency, so it stays cool inside a laptop or desktop during all-day workloads.
What connector and mounting space does the MTFDDAK1T0TBN-1AR1ZA need to work?
It requires a standard SATA III data and power connection plus a 2.5-inch bay with at least 7.00mm height clearance; the drive measures 69.85mm wide by 100.00mm deep and weighs 56.00g.
Will this 1100 Series SATA SSD work reliably alongside an older mechanical hard drive in the same system?
Yes, it connects through the same SATA III interface, delivers up to 530MBps sequential read and 92,000 IOPS random read, and its 1,500,000-hour MTTF means it can coexist with legacy storage without compatibility issues.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
