Green bare DDR5 RDIMM circuit board with gold edge connector and black memory chips

NEMIX RAM

NEMIX RAM 128GB DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM Supermicro H13DSH memory upgrade

SKU CH-GDPG-QRWVR

128 GB DDR5-6400 ECC registered RDIMM, 2Rx4 CL52 at 1.1 V, validated for Supermicro H13DSH servers

Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes

Exact-match 128 GB DDR5-6400 CL52 2Rx4 registered ECC at 1.1 V
Verified fit for Supermicro H13DSH motherboard with 288-pin RDIMM form factor
Registered architecture offloads the controller for full-population stability and ECC corrects single-bit errors
Check your system manual for supported capacities and DIMM population rules before installing
Lifetime replacement warranty with US-based technical support included

4 171,99 щ.д.

0.05357084 BTC по днешния курс

В наличност · изпраща се днес

На касата курсът се заключва за 30 минути.

Доставка до Съединени щати ориентировъчно

UPS Worldwide Expedited 3–6 работни дни Безплатно
DHL Express Worldwide 2–3 работни дни 74,90 щ.д.

Вносните мита се начисляват от Вашата държава при пристигане.

Доставка на друг адрес

Exact-match 128 GB DDR5-6400 RDIMM

This registered ECC module delivers 128 GB at 6400 MT/s with CL52 timing and 1.1 V operation. It is built for the Supermicro H13DSH motherboard and uses the 288-pin RDIMM form factor that board requires.

Registered DDR5 limits

The RDIMM architecture buffers address and command signals so the memory controller can drive every slot at full speed even when fully populated. ECC corrects single-bit errors on the fly, but the module will not work in systems that accept only unbuffered UDIMMs or SODIMMs.

Major OEM chips no spreader

Chips from Samsung Micron or Hynix are mounted on a bare PCB without a heat spreader, relying on server chassis airflow for cooling. The 2Rx4 rank organisation fits the board's population rules, and the 288-pin keying prevents mis-installation in incompatible slots.

Акценти

Exact-match 128 GB DDR5-6400 CL52 2Rx4 registered ECC at 1.1 V
Verified fit for Supermicro H13DSH motherboard with 288-pin RDIMM form factor
Registered architecture offloads the controller for full-population stability and ECC corrects single-bit errors
Check your system manual for supported capacities and DIMM population rules before installing
Lifetime replacement warranty with US-based technical support included

Спецификации

Brand	NEMIX RAM
Series	NEMIX RAM Original Series Server Memory
Model	DDR5 ECC RDIMM Registered Server Memory
Part Number	MR51200-724K1
Capacity	128GB
Type	288-Pin DDR5 RDIMM
Speed	DDR5 6400 (PC5 51200)
CAS Latency	CL52
Voltage	1.10V
ECC	Yes
Buffered/Registered	Registered
Rank	2Rx4
Chipset	Major OEM Samsung, Micron, Hynix
Heat Spreader	No
Compatible System	Supermicro
Features	DDR5 ECC RDIMM Motherboard Compatible
Package Content	128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Въпроси за този артикул

Should I pick the 128 GB DDR5-6400 CL52 2Rx4 registered ECC kit or a different capacity for my Supermicro H13DSH?

This kit is the exact-match 128 GB DDR5-6400 (PC5-51200) 2Rx4 registered ECC module at 1.1 V CL52 that the H13DSH memory controller expects, so it is recognised at full capacity and rated speed; choose a different capacity only if your board manual lists it in the approved population table.

What does the DDR5-6400 (PC5-51200) rating mean once the module is installed in the server?

The module will run at 6400 MT/s with CL52 latency at 1.1 V, delivering the full PC5-51200 bandwidth the platform specifies when all slots are populated with registered DIMMs.

How does the 288-pin registered ECC RDIMM interface affect real-world stability and capacity limits?

The registered buffer offloads the memory controller so every slot can run fully populated at 128 GB per DIMM, while on-die ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots.

Още от този рафт