Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Green bare DDR4 UDIMM module with gold edge contacts and black memory chips

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 ECC UDIMM CL19 1.2V memory upgrade

SKU CH-630A-RYK51

16GB DDR4 2666MHz ECC UDIMM module with CL19 latency for Synology RS2821RP+ NAS

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity expands NAS storage headroom
  • ECC UDIMM design guards data integrity under load
  • CL19 latency at 2666 MT/s sustains responsive throughput
  • 20 V operation reduces power draw in always-on systems
  • 288-pin DDR4 form factor fits Synology RS2821RP+ slots

Synology RS2821RP+ NAS upgrade

This 16 GB DDR4 2666 module is validated for the Synology RackStation RS2821RP+ NAS. It adds ECC error correction to protect data integrity in always-on storage workloads. The unbuffered UDIMM design fits the system memory slots without registered buffering.

288-pin UDIMM slot requirement

The stick occupies a single 288-pin DDR4 UDIMM slot and runs at the standard 1.2 V. No heat spreader is fitted so clearance inside the NAS chassis remains unchanged. The 2Rx8 organisation lets the memory controller access two ranks per channel for bandwidth efficiency.

Sustained load stability

Modules are stress tested under load before shipping to verify reliability during continuous NAS operation. ECC detection corrects single-bit errors that can accumulate during long uptime periods. CL19 latency and 1.2 V operation keep power draw steady throughout extended file serving or backup tasks.

Акценти

  • 16 GB capacity expands NAS storage headroom
  • ECC UDIMM design guards data integrity under load
  • CL19 latency at 2666 MT/s sustains responsive throughput
  • 20 V operation reduces power draw in always-on systems
  • 288-pin DDR4 form factor fits Synology RS2821RP+ slots

Спецификации

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR4 2666MHZ ECC Unbuffered UDIMM
Part NumberME21300-628K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSynology
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 288-PIN ECC Unbuffered UDIMM

Въпроси за този артикул

Will the 2666 MHz DDR4 speed limit sustained throughput on the Synology RS2821RP+?

The module runs at DDR4 2666 (PC4-21300) with CL19 timing; the RS2821RP+ memory controller is designed for this exact speed, so the rated frequency is the practical ceiling under sustained load.

Does the lack of a heat spreader raise temperatures during all-day NAS operation?

The 1.2 V unbuffered UDIMM operates at standard JEDEC voltage without a spreader; typical NAS chassis airflow keeps temperatures within spec for continuous duty.

Must the RS2821RP+ already support ECC unbuffered UDIMM memory for this module to work?

Yes, the RS2821RP+ requires DDR4 ECC unbuffered UDIMMs; this 16 GB 2Rx8 CL19 kit matches that requirement exactly.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.