Green rectangular DDR5 memory module with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 6400 CL52 1.1V 1Rx8 ECC Registered RDIMM memory upgrade

SKU CH-MYXY-CP0EW

16 GB DDR5 6400 CL52 1.1 V ECC registered RDIMM validated for the Supermicro H13SSL-N motherboard

Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes

Exact DDR5-6400 CL52 1.1V spec matches server controller for full-speed operation
Registered ECC RDIMM offloads controller and corrects single-bit errors for uptime
16GB 1Rx8 288-pin module validated for Supermicro H13SSL-N motherboard fit
Major-brand Samsung, Micron or Hynix DRAM chips ensure enterprise-grade reliability
Lifetime replacement warranty with US-based technical support included

472,99 щ.д.

0.00610349 BTC по днешния курс

В наличност · изпраща се днес

На касата курсът се заключва за 30 минути.

Доставка до Съединени щати ориентировъчно

UPS Worldwide Expedited 3–6 работни дни Безплатно
DHL Express Worldwide 2–3 работни дни 74,90 щ.д.

Вносните мита се начисляват от Вашата държава при пристигане.

Доставка на друг адрес

Exact-match DDR5 server upgrade

This 16 GB DDR5-6400 module is built for the Supermicro H13SSL-N motherboard. It delivers the precise rank, voltage, and timing the board's memory controller expects for full-capacity recognition.

Registered ECC limits and population rules

Registered architecture offloads the controller so every slot can run fully populated at rated speed. ECC corrects single-bit errors on the fly to stop silent data corruption. The motherboard manual defines supported capacities and required DIMM population order.

288-pin RDIMM form factor without spreader

The 288-pin Registered DIMM fits only boards wired for DDR5 RDIMMs, not UDIMM or SODIMM slots. No heat spreader is fitted, so airflow in the chassis must handle thermal dissipation. Buyers needing unbuffered memory or desktop form factors cannot use this module.

Акценти

Exact DDR5-6400 CL52 1.1V spec matches server controller for full-speed operation
Registered ECC RDIMM offloads controller and corrects single-bit errors for uptime
16GB 1Rx8 288-pin module validated for Supermicro H13SSL-N motherboard fit
Major-brand Samsung, Micron or Hynix DRAM chips ensure enterprise-grade reliability
Lifetime replacement warranty with US-based technical support included

Спецификации

Brand	NEMIX RAM
Series	NEMIX RAM Original Series Server Memory
Model	DDR5 ECC RDIMM Registered Server Memory
Part Number	MR51200-618K1
Capacity	16GB
Type	288-Pin DDR5 RDIMM
Speed	DDR5 6400 (PC5 51200)
CAS Latency	CL52
Voltage	1.10V
ECC	Yes
Buffered/Registered	Registered
Rank	1Rx8
Chipset	Major OEM Samsung, Micron, Hynix
Heat Spreader	No
Compatible System	Supermicro
Features	DDR5 ECC RDIMM Motherboard Compatible
Package Content	16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Въпроси за този артикул

Should I pick the 16 GB DDR5-6400 CL52 1Rx8 ECC RDIMM or a different capacity?

This module is a single 16 GB stick rated at DDR5-6400 with CL52 latency, 1.1 V operation and 1Rx8 registered ECC. Choose it when your Supermicro H13SSL-N requires exactly that rank, voltage and timing; add more identical sticks only if the board's population rules allow additional DIMMs per channel.

What does the 6400 MT/s rating actually deliver in the Supermicro H13SSL-N?

The board's memory controller will run this RDIMM at its rated 6400 MT/s (PC5-51200) with CL52 timings at 1.1 V, provided the BIOS is current and the DIMM is installed in a supported slot. Registered buffering lets every populated slot operate at that speed without down-clocking.

How does the 288-pin RDIMM interface limit performance on this platform?

The 288-pin registered DDR5 interface matches the H13SSL-N's DIMM slots exactly; the registered buffer removes electrical load from the memory controller so full population at 6400 MT/s is possible, while ECC corrects single-bit errors without reducing throughput.

Още от този рафт