NEMIX RAM
NEMIX RAM 2TB 16x128GB DDR5 6400 CL52 1.1V 2Rx4 ECC RDIMM Kit Supermicro H14DSG-O-CPU
16-module DDR5 6400 CL52 ECC registered kit delivering 2 TB for the Supermicro H14DSG-O-CPU motherboard
- Capacity2TB (16 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 2TB total capacity from 16 matched 128GB modules
- DDR5 6400 speed with CL52 latency for rated performance
- Registered ECC design corrects single-bit errors automatically
- 1V operation matches server memory controller requirements
- 288-pin RDIMM form factor fits Supermicro H14DSG-O-CPU motherboard
Exact-fit server kit
This 2 TB kit supplies sixteen 128 GB DDR5 RDIMMs built to the 6400 MT/s PC5-51200 standard. Registered ECC architecture and 2Rx4 organisation match the Supermicro H14DSG-O-CPU memory controller so the full capacity is recognised at rated speed.
Slot-population rules apply
Each module uses the 288-pin RDIMM form factor and 1.10 V operation, so it fits only boards that require registered DIMMs. The motherboard manual dictates the exact population order; skipping that step is the most common cause of boot failure or reduced capacity.
Full population at rated spec
Sixteen ranks per channel deliver the maximum 2 TB the platform supports when every approved slot is filled. Workloads that exceed this ceiling or need faster than CL52 timing will require a different platform rather than additional modules.
Акценти
- 2TB total capacity from 16 matched 128GB modules
- DDR5 6400 speed with CL52 latency for rated performance
- Registered ECC design corrects single-bit errors automatically
- 1V operation matches server memory controller requirements
- 288-pin RDIMM form factor fits Supermicro H14DSG-O-CPU motherboard
Спецификации
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K16 |
| Capacity | 2TB (16 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 2TB 16X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Въпроси за този артикул
How do I confirm the 16x128GB DDR5 6400 CL52 kit is running at its rated 6400MHz speed and CL52 latency after installation?
Enter the BIOS or UEFI on the Supermicro H14DSG-O-CPU and verify the memory frequency shows 6400MT/s (PC5-51200) with CL52 timings at 1.1V; the registered ECC RDIMM design ensures full 2TB capacity is recognised when all 16 slots are populated correctly.
What exactly ships in the box and is anything else required to install the 2TB kit?
The package contains the complete 2TB kit — sixteen 128GB DDR5 288-pin ECC registered RDIMM modules (part number MR51200-724K16). No additional parts or cables are needed; install them directly into the motherboard's DIMM slots following the population order in the Supermicro manual.
Why choose this 2TB 16x128GB DDR5 6400 CL52 kit over other capacities for the Supermicro H14DSG-O-CPU?
This kit matches the board's exact requirements — 288-pin registered ECC DDR5, 2Rx4 organisation, 1.1V operation and CL52 latency — delivering the maximum 2TB capacity the platform supports when all sixteen DIMM slots are filled with validated modules.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.



