Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Two green DDR5 RDIMM modules, no heat spreaders, 288-pin gold contacts

NEMIX RAM

NEMIX RAM 32GB 2x16GB DDR5 4800 CL40 ECC RDIMM SuperMicro memory upgrade

SKU CH-57RH-7EFVS

A 32 GB DDR5 ECC RDIMM kit (2 × 16 GB) at 4800 MT/s CL40 for SuperMicro servers

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection prevents data corruption with registered DDR5 modules
  • 32GB dual-channel kit (2x16GB) expands server memory capacity
  • 4800MHz speed with CL40 latency optimises throughput
  • 1V operation reduces power draw in dense configurations
  • Validated for SuperMicro X13SEM and SYS-211E SuperServer platforms

Compatible SuperMicro DDR5 RDIMM Kit

This 32GB kit uses two 16GB DDR5 4800 RDIMM modules built for SuperMicro SYS-211E-FRN2T, SYS-211E-FRDN2T, X13SEM-F and X13SEM-T servers. It delivers registered ECC memory for enterprise workloads that require data integrity and platform validation.

Capacity and registered ECC headroom

The 32GB total capacity suits virtualization, database and file-service roles where error correction and signal buffering matter. Workloads that exceed 32GB or demand higher frequencies than DDR5 4800 will need additional DIMM slots or faster modules.

DDR5 4800 CL40 interface limits

The modules run at DDR5 4800 (PC5-38400) with CL40 latency at 1.1V on the 288-pin RDIMM interface. Systems that require speeds above 4800 MT/s, lower CAS latency, or non-registered DIMMs cannot use this kit.

Акценти

  • ECC protection prevents data corruption with registered DDR5 modules
  • 32GB dual-channel kit (2x16GB) expands server memory capacity
  • 4800MHz speed with CL40 latency optimises throughput
  • 1V operation reduces power draw in dense configurations
  • Validated for SuperMicro X13SEM and SYS-211E SuperServer platforms

Спецификации

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Въпроси за този артикул

Will this DDR5 4800 ECC RDIMM kit work alongside existing DDR5 modules in my SuperMicro server?

Mixing memory kits is not recommended; for best stability populate all slots with identical 4800 CL40 1Rx8 registered modules so the memory controller runs a single timing set.

How can I verify the kit is running at DDR5 4800 CL40 with ECC active after installation?

Enter the BIOS or use a tool like CPU-Z to confirm the memory reports 4800 MT/s, CL40 latency, 1.10 V, and ECC enabled on each 16 GB module.

What is included in the package and do I need any extra parts to install it?

The box contains two 16 GB 288-pin DDR5 RDIMMs (32 GB total); no additional hardware is required beyond a compatible SuperMicro motherboard with free RDIMM slots.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.