Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Four green DDR4 SODIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2933 ECC SODIMM CL21 1.2V 260-pin server RAM

SKU CH-CY4P-FR2S6

32 GB kit of four 8 GB DDR4 2933 ECC SODIMM modules at CL21 and 1.2 V for 260-pin server slots

  • Capacity32GB (4 x 8GB)
  • Type260-Pin DDR4 ECC SODIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC protection prevents data corruption in servers
  • 32 GB kit expands memory capacity for heavy workloads
  • DDR4 2933 speed matches PC4-23400 platform specs
  • 20 V operation reduces power draw and heat
  • 260-pin SODIMM form factor fits compact server slots

32GB DDR4 ECC SODIMM kit for servers and NAS

This NEMIX RAM kit supplies 32GB of DDR4 ECC unbuffered memory in four 8GB modules. Each stick runs at 2933MHz with CL21 latency at 1.20V and uses a 260-pin SODIMM form factor. The 2Rx8 organisation and major OEM chips target stable operation in enterprise workloads.

Suited for ECC SODIMM slots needing 2933MHz

Builders populating servers, workstations or NAS units that accept DDR4 ECC SODIMMs at this speed will find a direct fit. Systems requiring registered DIMMs, non-ECC memory, a different pin count, voltage or speed grade cannot use this kit.

Simple SODIMM insertion; verify ECC support first

Installation follows the usual SODIMM procedure: align the notch, press until the latches click, and confirm capacity in BIOS. The most common issue is a platform that disables ECC or expects registered modules, which prevents the kit from functioning as intended.

Акценти

  • ECC protection prevents data corruption in servers
  • 32 GB kit expands memory capacity for heavy workloads
  • DDR4 2933 speed matches PC4-23400 platform specs
  • 20 V operation reduces power draw and heat
  • 260-pin SODIMM form factor fits compact server slots

Спецификации

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered SODIMM Memory
Part NumberMSE23400-828K4
Capacity32GB (4 x 8GB)
Type260-Pin DDR4 ECC SODIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC Unbuffered SODIMM Motherboard Compatible

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

What motherboard slot and voltage must my system provide for this 260-pin 1.20 V DDR4 SODIMM kit?

The modules require a 260-pin DDR4 SODIMM socket and operate at 1.20 V, so the motherboard must support DDR4 SODIMM at that voltage.

Will these ECC unbuffered CL21 modules run stably in a system that currently uses non-ECC DDR4 SODIMMs?

Mixing ECC unbuffered with non-ECC memory is not supported; the motherboard must enable ECC for all populated slots, so replace the existing modules with this kit.

How can I verify the kit is running at the rated 2933 MT/s CL21 after installation?

Check the memory speed and timings in the BIOS or with a tool such as CPU-Z; they should show 2933 MT/s and CL21 when the system is under load.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.