NEMIX RAM

NEMIX RAM 384GB (6x64GB) DDR5-6400 ECC RDIMM CL52 1.1V 2Rx4 memory upgrade for Supermicro H13SRH

SKU CH-PSX7-35BZ6

A 384 GB DDR5-6400 ECC registered server memory kit built with six 64 GB 2Rx4 modules at 1.1 V and CL52 latency, validated for the Supermicro H13SRH motherboard

Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes

384 GB total capacity from six 64 GB modules for maximum server density
DDR5-6400 speed with CL52 latency delivers rated throughput for Supermicro H13SRH
ECC and registered design correct single-bit errors and offload the memory controller
1 V operation matches the board's voltage requirement for stable full-population use
288-pin RDIMM form factor fits the exact slot type the motherboard expects

11 702,99 щ.д.

0.15054982 BTC по днешния курс

В наличност · изпраща се днес

На касата курсът се заключва за 30 минути.

Доставка до Съединени щати ориентировъчно

UPS Worldwide Expedited 3–6 работни дни Безплатно
DHL Express Worldwide 2–3 работни дни 74,90 щ.д.

Вносните мита се начисляват от Вашата държава при пристигане.

Доставка на друг адрес

Exact-Match DDR5-6400 RDIMM Kit

This 384GB kit contains six 64GB DDR5-6400 ECC Registered DIMMs built to the exact rank, voltage and timing the Supermicro H13SRH memory controller expects. It is intended for administrators who must populate every slot at full capacity without compatibility guesswork.

DDR5 RDIMM Population Limits

DDR5 Registered DIMMs allow full-slot population because the register buffers the command bus, yet the motherboard still defines maximum capacity per slot and approved population order. The manual must be consulted before installation to confirm supported configurations.

Upgrade From Partial or Lower-Capacity Kits

Replacing a partially filled set or smaller RDIMMs with this 6x64GB kit raises total memory to 384GB at the board's rated 6400MT/s speed. The jump is worth it when workloads need the full capacity ceiling and ECC protection at native voltage.

Акценти

384 GB total capacity from six 64 GB modules for maximum server density
DDR5-6400 speed with CL52 latency delivers rated throughput for Supermicro H13SRH
ECC and registered design correct single-bit errors and offload the memory controller
1 V operation matches the board's voltage requirement for stable full-population use
288-pin RDIMM form factor fits the exact slot type the motherboard expects

Спецификации

Brand	NEMIX RAM
Series	NEMIX RAM Original Series Server Memory
Model	DDR5 ECC RDIMM Registered Server Memory
Part Number	MR51200-924K6
Capacity	384GB (6 x 64GB)
Type	288-Pin DDR5 RDIMM
Speed	DDR5 6400 (PC5 51200)
CAS Latency	CL52
Voltage	1.10V
ECC	Yes
Buffered/Registered	Registered
Rank	2Rx4
Chipset	Major OEM Samsung, Micron, Hynix
Heat Spreader	No
Compatible System	Supermicro
Features	DDR5 ECC RDIMM Motherboard Compatible
Package Content	384GB 6X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Въпроси за този артикул

Should I pick the 384GB kit or a smaller capacity for my Supermicro H13SRH?

The 384GB kit (6 × 64GB) fills all six channels on the H13SRH, delivering maximum bandwidth and capacity; choose a smaller kit only if your workload does not need the full 384GB or if your CPU SKU limits total memory.

What does DDR5-6400 CL52 mean once the modules are installed in the server?

The memory controller will run the DIMMs at 6400 MT/s with a CAS latency of 52 cycles, giving a peak transfer rate of PC5-51200 while the registered buffer keeps every slot stable at full population.

Does the 288-pin RDIMM interface limit speed or capacity on the H13SRH?

The 288-pin registered DDR5 form factor is exactly what the H13SRH requires; it supports the full 6400 MT/s data rate and 64GB per module without down-clocking when all six slots are populated.

Още от този рафт