Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Six green DDR4 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 48GB (6x8GB) DDR4 3200 ECC RDIMM THINKMATE XF4-24S3 memory upgrade

SKU CH-F7WW-6V0BP

48GB DDR4 ECC registered server memory kit, six 8GB modules at 3200MHz CL22 for ThinkMate XF4-24S3 workstations

  • Capacity48GB (6 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 48 GB capacity expands workstation memory for heavy workloads
  • DDR4 3200 speed delivers high throughput for demanding applications
  • ECC registered design protects data integrity in critical environments
  • 2 V operation reduces power draw and heat output
  • Six 8 GB modules populate all slots for optimal channel balance

Compatible 48GB DDR4 ECC Kit

This 48GB kit contains six 8GB DDR4 3200 registered DIMMs built for the Thinkmate XF4-24S3 workstation. ECC and registered buffering protect data integrity in continuous workloads. Modules run at 1.2 V with CL22 timing and use major OEM chips from Samsung Micron or Hynix. The 288-pin RDIMM form factor matches the system memory slots exactly.

Suited for Thinkmate XF4-24S3 expansion

Administrators adding memory to a Thinkmate XF4-24S3 will find the correct speed voltage and registered ECC format in this kit. Builders using consumer motherboards or platforms that require unbuffered non-ECC DIMMs cannot use these modules. Systems limited to lower speeds or different pin counts are also incompatible.

Registered ECC DDR4 3200 specification

The registered ECC DDR4 3200 specification is the single factor that decides fit. Only platforms designed for 1.2 V 288-pin RDIMMs with CL22 timing and 1Rx8 organisation will accept this memory. Buyers must verify their motherboard documentation calls for registered ECC DDR4 3200 before purchase.

Акценти

  • 48 GB capacity expands workstation memory for heavy workloads
  • DDR4 3200 speed delivers high throughput for demanding applications
  • ECC registered design protects data integrity in critical environments
  • 2 V operation reduces power draw and heat output
  • Six 8 GB modules populate all slots for optimal channel balance

Спецификации

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K6
Capacity48GB (6 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content48GB (6X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Въпроси за този артикул

How do I install the 288-pin DDR4 RDIMM modules in the ThinkMate XF4-24S3, and what step is often missed?

Power down and unplug the workstation. Open the chassis, locate the six DDR4 slots, align each module's notch with the slot key, and press firmly until both side clips lock. The step often missed is populating all six channels in the order shown in the system manual to enable full registered ECC operation.

What maintenance or replacement will the 1Rx8 registered ECC kit need later?

The modules have no heat spreaders and run at 1.20 V, so no active cooling maintenance is required. ECC corrects single-bit errors on the fly. Replacement is only needed if a module fails; the lifetime warranty covers that event.

What limit appears first under sustained load with CL22 latency and 3200 MT/s speed?

The CL22 timing at 3200 MT/s sets the latency floor. Under continuous heavy workloads the registered buffer and ECC overhead become the bottleneck before thermal limits, since the DRAM operates at the standard 1.20 V without overclocking.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.