Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333MHz PC3-10600 1.35V 204-Pin SODIMM POSIFLEX HC-1021 memory upgrade

SKU CH-M8SM-QCG09

8GB DDR3 SODIMM at 1333MHz for POSIFLEX HC-1021 terminal, 1.35V 204-pin CL9 unbuffered module

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity boosts multitasking on POSIFLEX HC-1021 terminals
  • DDR3 1333MHz speed matches PC3-10600 system requirements
  • 35V low voltage reduces power draw in 21.5" touch units
  • 204-pin SODIMM form factor fits POSIFLEX kiosk motherboards
  • Non-ECC unbuffered design ensures stable point-of-sale operation

POSIFLEX HC-1021 memory upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX HC-1021 21.5-inch touch-screen infotainment terminal. It suits operators who need a single-module capacity increase for point-of-sale or kiosk workloads.

1.35 V low-voltage module

The stick runs at 1.35 V instead of the standard 1.50 V, reducing power draw and heat in the sealed terminal chassis. CL9 latency at 1333 MHz keeps response times predictable for transaction processing.

204-pin DDR3 slot required

Verify the terminal has a free 204-pin DDR3 SODIMM socket and that the BIOS accepts 2Rx8 unbuffered non-ECC modules. Systems limited to 4 GB per slot or to 1.50 V only will not support this upgrade.

Акценти

  • 8GB capacity boosts multitasking on POSIFLEX HC-1021 terminals
  • DDR3 1333MHz speed matches PC3-10600 system requirements
  • 35V low voltage reduces power draw in 21.5" touch units
  • 204-pin SODIMM form factor fits POSIFLEX kiosk motherboards
  • Non-ECC unbuffered design ensures stable point-of-sale operation

Спецификации

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Въпроси за този артикул

Will the 2Rx8 SODIMM need replacement if the POS terminal runs continuously?

The module is built with major OEM chips from Samsung, Micron or Hynix and stress-tested under load, so it is designed to last the life of the POSIFLEX HC-1021 terminal without scheduled replacement.

What limits sustained throughput on this DDR3 1333 CL9 stick?

The PC3-10600 bandwidth ceiling of 10600 MB/s and CL9 latency are the first bottlenecks during extended heavy workloads on the 21.5 inch touch terminal.

Does the 1.35 V low-voltage module run cooler than standard DDR3 in the HC-1021?

Operating at 1.35 V instead of 1.50 V reduces power draw and heat output, helping the fanless 21.5 inch infotainment terminal stay quiet during all-day operation.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.