NEMIX RAM
NEMIX RAM 96GB DDR5 5600 ECC RDIMM CL46 1.1V memory upgrade
A single 96 GB DDR5 registered ECC module running at 5600 MT/s with CL46 latency and 1.1 V operation
- Capacity96GB
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96 GB capacity expands server memory headroom
- DDR5 5600 MT/s delivers high bandwidth for intensive workloads
- ECC registered design protects data integrity in mission-critical systems
- 1 V operation reduces power draw per module
- 288-pin RDIMM form factor fits compatible Micron server platforms
96GB DDR5 ECC RDIMM for Micron servers
This registered DDR5 module delivers 96GB of error-correcting memory for Micron-compatible server and workstation platforms. It operates at 5600 MT/s with a CL46 latency at 1.1V. The single 288-pin RDIMM uses a 2Rx4 rank organisation built with major OEM chips. It targets IT professionals maintaining mission-critical environments that require registered ECC stability.
Capacity and headroom for dense workloads
The 96GB density suits virtualization hosts, database nodes and high-thread-count compute tasks that benefit from large per-slot capacity. Registered buffering and on-die ECC protect data integrity under sustained load. The module runs at the standard DDR5-5600 rate; workloads demanding higher bandwidth or lower latency will exceed this module's rated ceiling.
Build quality and daily implications
The module ships without a heat spreader, relying on server chassis airflow for thermal management. Its 288-pin RDIMM form factor fits only registered DDR5 slots keyed for 1.1V operation. Installation follows standard DIMM procedures; the single-module kit leaves remaining slots free for future expansion. Compatibility is validated for Micron MTC40F204WS1RC56BB1 platforms.
Акценти
- 96 GB capacity expands server memory headroom
- DDR5 5600 MT/s delivers high bandwidth for intensive workloads
- ECC registered design protects data integrity in mission-critical systems
- 1 V operation reduces power draw per module
- 288-pin RDIMM form factor fits compatible Micron server platforms
Спецификации
| Brand | NEMIX RAM |
|---|---|
| Series | Micron Server/Workstaion Compatible Series Memory |
| Model | Micron DDR5 5600MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K1 |
| Capacity | 96GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | MICRON |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 96GB (1X96GB) DDR5 5600MHZ PC5-44800 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory |
Въпроси за този артикул
Will this 288-pin DDR5 5600 RDIMM work alongside existing 4800 MT/s DDR5 ECC modules in the same server?
The module runs at 5600 MT/s with CL46 latency at 1.1 V. When mixed with slower DDR5 ECC RDIMMs, the system will typically clock all channels down to the lowest common speed and loosest timings.
How can I verify the module is running at 5600 MT/s with ECC active after installation?
Check the memory speed and ECC status in the server BIOS or UEFI, or use operating-system tools such as dmidecode on Linux or Windows Server Manager to confirm 5600 MT/s operation and ECC correction reporting.
Does the single 96 GB stick ship with a heat spreader or any extra brackets, or must those be purchased separately?
The package contains only the 96 GB DDR5 5600 CL46 288-pin ECC RDIMM itself; no heat spreader, brackets or additional accessories are included.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.



