Two green DDR5 RDIMM modules with black chips, no heat spreaders, 288-pin edges, 192GB kit

NEMIX RAM

NEMIX RAM DDR5 5600 192GB (2x96GB) ECC Registered RDIMM for Supermicro H13SSH-E

SKU CH-65V3-MBYKK

A 192GB dual-module DDR5 kit running at 5600MHz with CL46 latency, registered ECC, 2Rx4 rank and 1.1V operation, validated for the Supermicro H13SSH-E motherboard

Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes

192 GB capacity across two 96 GB modules for dense server workloads
DDR5 5600 speed rated at PC5-44800 for high-throughput data paths
Registered ECC RDIMM with 2Rx4 organisation offloads the controller and corrects single-bit errors
1 V operation at CL46 matches the motherboard's specified voltage and timing
288-pin form factor verified for Supermicro H13SSH-E memory population rules

5 892,99 щ.д.

0.07601994 BTC по днешния курс

В наличност · изпраща се днес

На касата курсът се заключва за 30 минути.

Доставка до Съединени щати ориентировъчно

UPS Worldwide Expedited 3–6 работни дни Безплатно
DHL Express Worldwide 2–3 работни дни 74,90 щ.д.

Вносните мита се начисляват от Вашата държава при пристигане.

Доставка на друг адрес

192GB DDR5-5600 ECC RDIMM kit for Supermicro

This kit delivers 192GB of DDR5-5600 registered ECC memory in two 96GB modules. It is built for the Supermicro H13SSH-E motherboard and matches the exact rank, voltage, and timing that the board's memory controller expects.

Capacity and headroom at CL46 1.1V

Two 96GB 2Rx4 modules provide 192GB total capacity for multi-tenant virtualization, large in-memory databases, and heavy container workloads. The registered architecture keeps every slot stable at full population, while on-die ECC corrects single-bit errors before they affect production data.

Fits 288-pin RDIMM slots

The 288-pin RDIMM form factor installs directly into the H13SSH-E's DDR5 slots without adapters. Registered buffering reduces electrical load on the CPU memory controller, freeing headroom for full-speed operation across all populated channels. Verify your board's population order in the manual before installation.

Акценти

192 GB capacity across two 96 GB modules for dense server workloads
DDR5 5600 speed rated at PC5-44800 for high-throughput data paths
Registered ECC RDIMM with 2Rx4 organisation offloads the controller and corrects single-bit errors
1 V operation at CL46 matches the motherboard's specified voltage and timing
288-pin form factor verified for Supermicro H13SSH-E memory population rules

Спецификации

Brand	NEMIX RAM
Series	NEMIX RAM Original Series Server Memory
Model	DDR5 ECC RDIMM Registered Server Memory
Part Number	MR44800-9624K2
Capacity	192GB (2 x 96GB)
Type	288-Pin DDR5 RDIMM
Speed	DDR5 5600 (PC5 44800)
CAS Latency	CL46
Voltage	1.10V
ECC	Yes
Buffered/Registered	Registered
Rank	2Rx4
Chipset	Major OEM Samsung, Micron, Hynix
Heat Spreader	No
Compatible System	Supermicro
Features	DDR5 ECC RDIMM Motherboard Compatible
Package Content	192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Въпроси за този артикул

Will this DDR5 5600 CL46 2Rx4 1.1V RDIMM kit run at full speed on my Supermicro H13SSH-E board?

The kit matches the board's required 288-pin Registered ECC form factor and exact 5600 MT/s, CL46, 1.1V, 2Rx4 spec so the memory controller recognises all 192 GB at rated speed.

How can I verify the modules are operating at DDR5 5600 with ECC active after installation?

Check the BIOS memory information screen or run dmidecode — it should report 5600 MT/s, CL46, 1.1 V, Registered ECC and show the full 192 GB capacity with no correctable errors logged.

Does the MR44800-9624K2 box include any heat spreaders, cables or mounting hardware, or just the two 96 GB RDIMMs?

The package contains only the two 96 GB DDR5 5600 Registered ECC RDIMMs; no heat spreaders, cables or extra hardware are included.

Още от този рафт