Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Black 100mm blower fan with 3-pin connector

OEM Industries

OEM Industries D12BM-12 100mm 12V 0.3A 3-pin blower CPU cooler

SKU CH-P283-2SBKC

A 100 mm blower-style fan moves air directly over a CPU heatsink using a 12 V, .3 A three-pin connection and ball-bearing motor

  • ColorBlack
  • TypeFan only
  • Fan Size100mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 100 mm blower fan directs airflow straight onto the CPU
  • 12 V 0.3 A rating keeps power draw low for server use
  • Ball bearing design extends operating life under continuous load
  • 3-pin connector provides simple speed monitoring
  • Compact 97 x 33 mm frame fits tight chassis spaces

100mm blower fan for server CPU cooling

The OEM Industries D12BM-12 is a 100mm blower fan designed for server CPU cooling applications. It operates at 12V drawing 0.3A through a standard 3-pin power connector. The unit uses ball bearings and has no LED lighting. Its 97mm by 33mm frame fits tight server enclosures where directed airflow is required.

Focused airflow with single-fan capacity

The blower design pushes air across a heatsink in a concentrated stream, handling moderate thermal loads in 1U or 2U chassis. A single 100mm fan at 0.3A provides limited headroom; it runs out quickly on high-TDP processors or in poorly ventilated racks. The 3-pin connector allows voltage control but lacks PWM precision for fine speed curves.

Replaces worn OEM blowers in legacy servers

This cooler suits administrators swapping out failed or noisy OEM blowers in existing server boards with 3-pin headers. The jump is worth it when the original fan has seized or bearings have degraded, restoring directed cooling without redesigning the thermal solution. It is not for builders needing PWM control, higher static pressure, or multi-fan redundancy.

Акценти

  • 100 mm blower fan directs airflow straight onto the CPU
  • 12 V 0.3 A rating keeps power draw low for server use
  • Ball bearing design extends operating life under continuous load
  • 3-pin connector provides simple speed monitoring
  • Compact 97 x 33 mm frame fits tight chassis spaces

Спецификации

ModelD12BM-12
ColorBlack
TypeFan only
Fan Size100mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Въпроси за този артикул

Will the 100mm blower fit in the same 97×33mm cut-out as my current YateLoon 9733 unit?

The fan measures 100mm across and the frame is 97mm by 33mm, so it matches the standard 9733 mounting footprint used by many server chassis.

How can I verify the 12V 0.3A blower is spinning correctly after installation?

Connect the 3-pin header to the motherboard and check the fan-speed reading in BIOS or monitoring software; a steady RPM signal confirms the ball-bearing motor is running.

Does the package include mounting screws or a PWM adapter for the 3-pin connector?

The box contains only the blower fan itself; screws and any 3-pin to 4-pin adapters must be sourced separately.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.