OEM Industries
OEM Industries YL12038HSL 120mm AC Fan 220-240V 18W Ball Bearing
120 mm AC fan runs on 220-240 V, delivers 2.58-3.15 m³/min airflow at 2600-2900 rpm with 42-45 dB-A noise using ball bearings
- ColorBlack
- TypeFan only
- Fan Size120mm
- Bearing TypeBall
- Power Connector2 Pin
- LEDNo
- 120 mm fan delivers 2.58–3.15 m³/min airflow for effective case cooling
- Ball bearing design ensures reliable operation at 2600–2900 RPM
- Runs on 220–240 V AC mains power with 18 W draw
- Low 42–45 dB-A noise keeps workstations quiet
- Two-pin connector fits standard IPC and cabinet chassis
Purpose-Built AC Cooling
The OEM Industries YL12038HSL is a 120mm AC fan designed for industrial PC cabinets and IPC cases. It runs directly from 220-240V mains supply at 50/60Hz without an external power supply. Ball-bearing construction targets continuous-duty environments where long service intervals matter.
Suited For Rack Builds Not Desktop Towers
This unit fits installers wiring forced-air paths into server racks or cabinet enclosures with mains distribution already in place. It is not for builders needing a standard 12V PWM fan header, RGB lighting, or a bundled heatsink for a consumer CPU socket. Buyers who want a drop-in replacement for a typical chassis fan should look at low-voltage DC models instead.
Steady Airflow At Fixed Speed
The motor spins between 2600 and 2900 R/min delivering 2.58 to 3.15 M3/min of airflow at a constant 42 to 45 dB-A. Power draw sits at 18W typical with a 21/23W rating across the voltage range. Because speed does not modulate, acoustic output and thermal capacity remain predictable during sustained 24/7 operation.
Акценти
- 120 mm fan delivers 2.58–3.15 m³/min airflow for effective case cooling
- Ball bearing design ensures reliable operation at 2600–2900 RPM
- Runs on 220–240 V AC mains power with 18 W draw
- Low 42–45 dB-A noise keeps workstations quiet
- Two-pin connector fits standard IPC and cabinet chassis
Спецификации
| Model | YL12038HSL |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 120mm |
| Bearing Type | Ball |
| Power Connector | 2 Pin |
| LED | No |
Въпроси за този артикул
What voltage supply must I already have to run the YL12038HSL fan?
The fan requires an AC supply of 220 to 240 volts at 50 or 60 Hz.
Will the 120 mm frame and 2-pin connector fit my existing IPC cabinet case?
Yes, the 120 mm square frame and standard 2-pin power connector match typical IPC cabinet case mounting points.
How can I confirm the fan is spinning at the rated 2600 to 2900 RPM after installation?
Use a tachometer or BIOS hardware monitor to verify the rotational speed falls within the 2600 to 2900 RPM range.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



