OWC 8GB DDR4 2666 ECC UDIMM CL19 1.2V 1Rx8 288-pin memory upgrade
- 8GB
- 288-Pin DDR4 ECC UD…
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
OWC
16 GB DDR4-2666 ECC UDIMM kit (2×8 GB, CL19, 1.2 V) validated for Synology RS4017xs+ and RS4021xs+ NAS
Capacity 16GB (2 x 8GB)
This kit adds 16GB of DDR4 2666 ECC UDIMM memory across two 8GB modules. It is built for Synology RackStation RS4017xs+ and RS4021xs+ systems that require JEDEC-standard unbuffered ECC memory. The CL19 timing and 1.2V operation match the platform specifications. Buyers needing registered DIMMs or non-ECC memory should choose a different product.
Each module runs at the rated 2666MHz speed with CL19 latency while drawing only 1.2V. ECC circuitry detects and corrects single-bit errors to protect data integrity in NAS workloads. The unbuffered design keeps the signal path short for broad compatibility with the listed RackStation models. Backward compatibility allows use in slots rated for 2133MHz or 2400MHz DDR4.
The paired modules are validated together to ensure stable dual-channel operation in the target Synology systems. OWC tests every module in-house and backs the kit with a limited lifetime warranty and free technical support. No heat spreaders are included, keeping the low-profile form factor compatible with dense server chassis. The kit contains only the two memory modules; no tools or software are bundled.
| Brand | OWC |
|---|---|
| Part Number | 2E6D41R8016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | Synology RackstationRS4017xs+ Synology RackstationRS4021xs+ |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Power off the NAS, unplug it, open the chassis, locate the memory slots, align the notch on each 288-pin module with the slot key, press down firmly until the retention clips click on both sides, then reassemble. The step often missed is fully seating both ends so the clips engage automatically.
No scheduled maintenance is required for the modules themselves. Keep the NAS vents clear of dust and ensure the cooling fans run normally so the 1.2V DIMMs stay within thermal limits. Replacement is only necessary if a module fails or you need more capacity later.
The memory controller will operate at the rated 2666 MT/s with CL19 latency. Under continuous heavy load the first limit encountered is typically the NAS thermal envelope or the CPU core count, not the bandwidth of these 1.2V ECC UDIMMs.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?