Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Green printed circuit board with black memory chips in a 288-pin DIMM form factor

OWC

OWC 16GB DDR4 2133MHz CL15 1.2V 288pin UDIMM HP Envy Phoenix 860 series memory upgrade

SKU CH-HV55-GZHV8

16 GB DDR4 2133 MHz CL15 UDIMM for HP Envy Phoenix 860 series desktops

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 16GB DDR4 module doubles multitasking headroom for HP Envy Phoenix 860 series
  • 2133MHz CL15 timing keeps data flowing smoothly through everyday workloads
  • 2V DDR4 voltage reduces power draw and heat inside the chassis
  • 288-pin UDIMM form factor drops straight into the desktop memory slots
  • Tested to JEDEC and RoHS specs for a warranty-safe upgrade

HP Envy Phoenix 860 DDR4 upgrade

This 16 GB DDR4 2133 MHz CL15 UDIMM is built for HP Envy Phoenix 860 desktops including the 860-080nz, 860-081no, 860-082no, 860-084no and 860-090nz. It runs at 1.2 V and meets JEDEC PC4-17000 specifications for a warranty-safe memory increase.

Who this suits and who should look elsewhere

The module fits owners of the listed Phoenix 860 models who want a simple capacity boost for multitasking and larger workloads. It will not work in laptops, small-form-factor PCs or any system that requires SODIMM, ECC, registered or higher-speed DDR4 memory.

Installation and common pitfalls

The 288-pin unbuffered DIMM installs in the standard desktop memory slot with a straight press until the retention clips click. Common issues include mixing with existing modules that have different speeds or latencies, which can force the system to run at the lowest common settings or fail to boot.

Акценти

  • 16GB DDR4 module doubles multitasking headroom for HP Envy Phoenix 860 series
  • 2133MHz CL15 timing keeps data flowing smoothly through everyday workloads
  • 2V DDR4 voltage reduces power draw and heat inside the chassis
  • 288-pin UDIMM form factor drops straight into the desktop memory slots
  • Tested to JEDEC and RoHS specs for a warranty-safe upgrade

Спецификации

BrandOWC
Part Number2U1D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY Phoenix 860-080nz
HP ENVY Phoenix 860-081no
HP ENVY Phoenix 860-082no
HP ENVY Phoenix 860-084no
HP ENVY Phoenix 860-090nz

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

Does this 288-pin DDR4 2133MHz module need an HP Envy Phoenix 860 series desktop to work?

Yes, the module is validated for HP Envy Phoenix 860-080nz, 860-081no, 860-082no, 860-084no and 860-090nz systems that accept 288-pin DDR4 UDIMMs.

Can I keep my existing DDR4 2133MHz CL15 sticks and add this 16GB 2Rx8 module alongside them?

The module runs at 1.2V with CL15 timing; mixing ranks is usually fine but the system will run all modules at the slowest common speed and latency.

How do I confirm the new 16GB stick is running at PC4-17000 2133MHz after installation?

Open Task Manager or BIOS and verify the reported speed shows 2133 MHz and the total installed memory has increased by 16 GB.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.