Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Two green DDR3 ECC registered DIMMs with gold contacts

OWC

OWC 32GB (2x16GB) DDR3 1333 ECC Registered RDIMM 2Rx4 memory upgrade

SKU CH-K8A5-YJK1F

32 GB DDR3-1333 ECC registered RDIMM kit (2 × 16 GB) for Supermicro SuperServer 5086B, 8026B and 8046B systems

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2 × 16 GB) expands memory capacity
  • DDR3 1333 PC3-10600 CL9 matches supported speed
  • 240-pin 1.5 V RDIMM fits listed Supermicro models
  • 2Rx4 dual-rank layout optimises bandwidth for workloads

Server memory upgrade

This kit provides 32GB of DDR3 ECC registered memory in a matched pair of 16GB modules. It is built for Supermicro SuperServer 5086B, 8026B and 8046B systems that require registered DIMMs. The modules will not work in standard desktop computers or alongside unbuffered memory.

Thermals and power

Each module runs at the standard DDR3 voltage of 1.5V without a heat spreader. Registered buffering reduces electrical load on the server memory controller during normal operation. The CL9 latency at 1333MHz delivers stable throughput for typical server workloads.

Registered ECC constraint

The 2Rx4 registered ECC design is the single factor that determines compatibility; this memory only functions in platforms that explicitly support registered DIMMs. Buyers needing unbuffered or non-ECC modules for workstations or desktops must choose a different product.

Акценти

  • ECC registered design protects data integrity in servers
  • 32 GB kit (2 × 16 GB) expands memory capacity
  • DDR3 1333 PC3-10600 CL9 matches supported speed
  • 240-pin 1.5 V RDIMM fits listed Supermicro models
  • 2Rx4 dual-rank layout optimises bandwidth for workloads

Спецификации

BrandOWC
Part Number1R3D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 5086B Series
Supermicro SuperServer 8026B Series
Supermicro SuperServer 8046B Series

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

How do I install the 240-pin DDR3 1333 RDIMM kit in a Supermicro 5086B, 8026B or 8046B server?

Power down, open the chassis, align each 16 GB module’s notch with the DIMM slot key, press firmly until the retention clips click, then populate slots in the order the server manual specifies for registered memory.

What maintenance or replacement will the ECC registered RDIMM kit need over its service life?

No routine maintenance is required; the modules carry a limited lifetime warranty and an advanced replacement programme, so a failed stick is swapped rather than repaired.

What is the first limit reached when the 2Rx4 1.5 V DDR3 1333 kit runs sustained workloads?

The memory controller’s maximum supported capacity and rank-per-channel limit will be reached before the modules hit thermal or voltage thresholds.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.