NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Supermicro
Socket SP3 board for single AMD EPYC 7003 or 7002 CPU, eight-channel DDR4-3200 up to 2 TB, five PCIe 4.0 x16 plus two x8 slots, dual 10 GbE LAN and eight SAS3 ports
The Supermicro MBD-H12SSL-CT-O is a Socket SP3 ATX server board that accepts a single AMD EPYC 7003 or 7002 series processor. It provides eight 288-pin DDR4 slots running at 3200 MHz with a maximum capacity of 2 TB in an eight-channel configuration. Registered ECC memory is required.
Builders who need five PCIe 4.0 x16 slots, two PCIe 4.0 x8 slots and two M.2 M-key connectors for 2280 or 22110 devices will fit this board. Eight SATA 6.0 Gb/s ports and a Broadcom 3008 SAS3 controller supplying eight 12 Gbps SAS ports serve high-density storage arrays. It is not for systems that require multiple CPU sockets or memory beyond the 2 TB limit.
EPYC 7003 series processors need BIOS 2.0 or newer for drop-in operation, while the newest 3D V-Cache models require BIOS 2.3 or newer. Dual 10 GbE LAN ports use the Broadcom BCM57416 controller, and ASPEED AST2500 BMC graphics provide out-of-band management.
| Brand | SUPERMICRO |
|---|---|
| Model | MBD-H12SSL-CT-O |
| CPU Socket Type | Socket SP3 |
| CPU Type | Supports AMD EPYC 7003/7002 Series Processor (The latest AMD EPYC 7003 Series Processor with AMD 3D V-Cache Technology requires BIOS version 2.3 or newer) |
| Number of DDR4 Slots | 8 x 288-pin |
| DDR4 Standard | DDR4 3200 |
| Maximum Memory Supported | 2TB |
| Channel Supported | Eight Channel |
| ECC Supported | Yes |
| Registered | Yes |
| PCI Express 4.0 x16 | 5 PCI-Express 4.0 x16 2 PCI-Express 4.0 x8 |
| SATA | 8 x SATA 6.0Gb/s |
| SAS | 8 x SAS3 (12 Gbps) |
| M.2 | Interface: 2 PCI-E 4.0 x4 Form factor: 2280, 22110 Key: M-key |
| LAN Speed | 10Gbps |
| Second LAN Speed | 10Gbps |
| Max LAN Speed | 2 x 10Gbps |
| COM | 1 |
| Video Ports | D-Sub |
| USB 3.0 | 6 x USB 3.0 (4 rear + 2 via header) |
| Form Factor | ATX |
| Dimensions (W x L) | 12.0" x 9.6" |
| Тегло на пратката | 1.84 kg |
| Размери на опаковката | 462 × 371 × 86 mm |
Align the EPYC 7003 or 7002 series CPU with the Socket SP3 keying, lower the carrier frame, and torque the captive screws in the labelled sequence; the step most often missed is updating the BIOS to version 2.0 or newer for 7003 series drop-in support, or 2.3 for 3D V-Cache models.
The two M-key M.2 slots accept 2280 and 22110 form-factor drives on PCIe 4.0 x4; any drive can be swapped later by removing the single retaining screw, and no other M.2-specific maintenance is required.
The memory subsystem caps at 2 TB of registered ECC DDR4 across the eight 288-pin slots, so total capacity is the first hard ceiling under sustained multi-channel workloads.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?