Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Syba
Steel CPU stand adjusts from 5 to 9 inches wide, holds 80 lb on four 1.5-inch casters with two double-locking wheels
The Syba SY-ACC65057 is a black steel stand that holds an ATX tower off the floor. Its width adjusts from five to nine inches to fit a range of chassis sizes. Four 1.5 inch casters, two with double-locking brakes, let the system roll when needed and stay fixed when parked. A padded interior protects the case finish.
Without wheels the frame supports up to two hundred pounds; with the casters fitted the rated limit is eighty pounds. The base plate measures 9.75 by 10.00 by 1.00 inches and the side walls are 9.75 by 3.50 by 1.12 inches. Metal thickness is one sixteenth of an inch. The unit itself weighs five pounds.
Raising the tower on casters brings front and rear ports closer to hand level for easier peripheral changes. The adjustable cradle frees floor space and simplifies cleaning underneath. Buyers who need a fixed mount without wheels or a stand rated above eighty pounds mobile load should consider other solutions.
| Brand | Syba |
|---|---|
| Model | SY-ACC65057 |
| Types | CPU Accessories |
| Colors | Black |
| Specifications | Adjustable Width from 5 to 9 inches Base Plate Dimensions: 9.75" x 10.00" x 1.00" Side Walls Dimensions: 9.75" x 3.50" x 1.12" 4 x 1.5 x 1.75" Casters (2 with Double-Locking) Metal Thickness: 1/16" Maximum Weight Supported (without Wheels): 200.00 lbs. Maximum Weight Supported (with Wheels): 80.00 lbs. Padded Interior Main Body Color: Black Wheel Color: Black Weights: 5.00 lbs. Package Includes: Heavy Duty Black Computer Tower Case Stand 4 x Casters 6 x Mounting Screws 1 x Wrench for Easy Installation |
| Тегло на пратката | 2.29 kg |
| Размери на опаковката | 262 × 257 × 51 mm |
Slide the side walls along the base plate until the inner gap matches your chassis width between 5 and 9 inches, then tighten the locking bolts fully; the step often missed is confirming both sides are clamped evenly so the case sits level on the padded interior.
The four 1.5 inch casters, especially the two double-locking units, wear before the 1/16 inch steel frame; inspect the wheel tread and lock engagement every few months and swap casters when rolling feels rough or locks fail to hold.
The stand supports 200 lbs stationary, but once the 1.5 inch casters are fitted the rolling capacity drops to 80 lbs; exceed that and the wheels become the first limit under sustained use.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?