Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Standalone duplicator tower with 20x2 LCD display and fifteen M.2 slots

Systor

Systor 1 to 15 SATA & NVMe Duplicator 24GB/min SYSNVME-NX415

SKU CH-Z93V-9RW3K

Standalone duplicator copies or sanitises up to 15 SATA and NVMe M.2 drives at 24 GB per minute

  • Target1 to 15
  • Display20 x 2 LCD
  • Operating TypeStandalone

TARGET SIZE 1 to 15

  • Standalone operation with no computer needed
  • Copies up to 15 drives simultaneously at 24GB per minute
  • Supports NVMe and SATA M.2 drives including 18TB+ capacities
  • Secure erase compliant with NIST 800-88 and DoD 5220.22-M standards
  • 20 x 2 LCD display for clear status monitoring

What this duplicator does

The Systor SYSNVME-NX415 is a standalone duplicator and sanitiser that copies or erases one source drive to as many as fifteen target drives. It works with NVMe and SATA M.2 media without a host computer or additional software. The unit reaches transfer rates up to 24 GB per minute and supports drives larger than 18 TB.

Who it suits and who it does not

IT departments, forensic labs and data centres that need simultaneous duplication or certified erasure of multiple M.2 devices will benefit from the standalone operation and NIST 800-88 or DoD 5220.22-M compliant wipe modes. Buyers who only duplicate a single drive occasionally or who require USB or legacy IDE interfaces should consider a different solution.

The specification that decides fit

The duplicator handles fifteen targets at once and accepts NVMe and SATA M.2 form factors including 2230, 2242, 2260, 2280 and 22110 sizes. If your workflow demands more than fifteen concurrent targets or involves drive interfaces not listed here, this unit will not meet the requirement.

Акценти

  • Standalone operation with no computer needed
  • Copies up to 15 drives simultaneously at 24GB per minute
  • Supports NVMe and SATA M.2 drives including 18TB+ capacities
  • Secure erase compliant with NIST 800-88 and DoD 5220.22-M standards
  • 20 x 2 LCD display for clear status monitoring

Спецификации

Target1 to 15
Display20 x 2 LCD
Operating TypeStandalone

Други версии на този модел

4 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

What drives do I need to populate the 15 target slots on the SYSNVME-NX415?

The duplicator accepts NVMe M.2 and SATA M.2 drives in sizes 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080 and 22110, plus PCIe SSDs and SATA Express M.2 devices up to 18 TB capacity.

Can I copy from an NVMe source drive to SATA M.2 targets using this unit?

Yes, the duplicator automatically detects NVMe and SATA signals and supports cross-interface duplication between NVMe PCIe M.2, NGFF SATA M.2 and AHCI devices.

How do I verify a copy finished correctly on the SYSNVME-NX415?

The 20 x 2 LCD shows real-time progress and final status for each of the 15 targets, and the Compare function can validate bit-for-bit accuracy after duplication.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.