Thermalright FW360 SE ARGB V2 360mm liquid cooler

Ready-to-run 360 mm AIO with 2″ LCD

The Thermalright FW360 SE ARGB V2 is a closed-loop liquid cooler built for desktop CPUs on AMD AM4, AM5 and Intel LGA115X, LGA1200, LGA1700 and LGA1851 sockets. It ships with a 397 mm aluminium radiator, three 120 mm fans and a pump block that integrates a 320×320 pixel colour display. The unit is aimed at builders who want a single-box solution with addressable RGB lighting and real-time system stats on the block.

Daisy-chain fans cut cable count

Three TL-M12QW fans connect in series through a single 4-pin PWM header, so only one fan cable and one 5 V ARGB lead reach the motherboard. The pump runs at up to 3000 RPM and the fans at up to 2000 RPM with a maximum noise level of 28.2 dBA. The 400 mm tubes are long enough for most mid-tower layouts, but routing them behind a large GPU or around a top-mounted radiator bracket can require careful bending to avoid kinks.

Check radiator clearance and tube reach

Measure the 397 mm radiator length against your case’s front, top or rear mounting points before ordering. Verify that the 400 mm tube length spans the distance from your chosen radiator position to the CPU socket without stretching. Confirm the motherboard has a 4-pin PWM header for the pump and a 5 V addressable RGB header for the LCD and fan lighting. The cooler does not fit sockets outside the listed AMD and Intel families.