Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Thermaltake
Three 120 mm ARGB fans with reversible blades, PWM 500–2000 RPM and hydraulic bearings
The Thermaltake SWAFAN EX12 comes as three white 120 mm case fans with hydraulic bearings and addressable RGB lighting. Each unit runs at 500 to 2000 RPM via PWM control and includes both standard and reverse blade sets for flexible airflow direction. The pack suits builders who want coordinated lighting and push-pull or intake-exhaust configurations without buying separate kits.
The fans draw power and signal through a 2510 4-pin PWM connector and a 5 V ARGB 3-pin header, so the motherboard must supply both. Maximum airflow reaches 57.11 CFM on the standard blade and 56.26 CFM on the reverse blade, with noise rated at 30.6 dB-A and 32.5 dB-A respectively. No hardware controller is included, so all speed and lighting curves depend on motherboard software support.
Verify that your board has at least one 5 V ARGB header and enough 4-pin PWM headers for three fans, or plan for a powered splitter. Each frame measures 120 by 120 by 25 mm, so confirm mounting points and cable routing space in your chassis. The reversible blades are swapped manually, so allow time for installation if you intend to mix orientations.
| Brand | Thermaltake |
|---|---|
| Model | SWAFAN EX12 |
| Part Number | CL-F169-PL12SW-A |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | PWM 500 ~ 2000 R.P.M |
| Air Flow | Standard Fan Blade: 57.11 CFM (one fan) Reverse Fan Blade: 56.26 CFM (one fan) |
| Noise Level | Standard Fan Blade: 30.6 dB-A (one fan) Reverse Fan Blade: 32.5 dB-A (one fan) |
| Power Connector | 2510-4 PIN PWM, 5V ARGB header-3PIN |
| Color | White |
| LED | ARGB |
| Dimensions | 120 x 120 x 25 mm |
| Package Contents | 3 x Fan Frames 3 x Standard Fan Blade (Pre-installed) 3 x Reverse Fan Blade 3 x Cable |
| Тегло на пратката | 1.04 kg |
| Размери на опаковката | 185 × 170 × 130 mm |
Standard blades are pre-installed and deliver 57.11 CFM at 30.6 dB-A; reverse blades give 56.26 CFM at 32.5 dB-A — use reverse blades when you need intake airflow pulled through a radiator or restrictive filter.
At full 2000 RPM a single fan moves 57.11 CFM while producing 30.6 dB-A — three fans scale airflow proportionally but combined noise rises only a few decibels, giving strong cooling with low audible hum.
Yes — the 4-pin PWM connector lets the board control speed between 500 and 2000 RPM, and the 3-pin 5 V ARGB header syncs lighting with any motherboard that supports 5 V addressable RGB.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?