Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Open zipper tool bag showing 42-piece 3D printer cleaning kit with needles, brushes, tweezers and carving knife

TIOPY S-TOOL KIT 42Pcs 3D Printer Nozzle Cleaning Tool Kit

SKU CH-0AMM-FPG5S

42-piece kit clears clogged 3D-printer nozzles with 31 stainless-steel needles in nine sizes from 0.15 mm to 0.8 mm plus wire brushes, tweezers.

  • ColorMulti-color
  • TypeS-TOOL KIT
  • Clear clogs across most nozzles with 31 needles in 9 sizes from .15 to .8 mm
  • Remove stubborn residue using stainless and copper wire brushes on hotend surfaces
  • Trim model burrs precisely with a stainless carving knife plus 5 replacement blades
  • Reach tight angles with straight and curved stainless steel tweezers for detailed cleaning
  • Keep all 42 pieces organised and portable in the included zipper tool bag

42-Piece Nozzle Cleaning Kit for 3D Printers

This kit supplies 31 stainless-steel cleaning needles in nine diameters from 0.15 mm to 0.8 mm plus two wire brushes, two tweezers, a carving knife with five spare blades and a zipper tool bag. It is built for hobbyists and small-shop operators who need to clear clogged nozzles and remove print burrs on a regular basis.

Check nozzle diameter

Verify that your printer uses nozzles within the 0.15 mm to 0.8 mm range so the supplied needles fit. Ensure the hot end can be reached with a 25 mm to 60 mm needle length and that there is room to manoeuvre the brushes and tweezers around the heater block.

Replaces individual needles and improvised picks

The set consolidates separate cleaning pins, makeshift wires and single-purpose knives into one organised bag. The jump is worth it when you frequently switch nozzle sizes or spend time fashioning tools, because every common diameter and a burr-removal blade are immediately available.

Акценти

  • Clear clogs across most nozzles with 31 needles in 9 sizes from .15 to .8 mm
  • Remove stubborn residue using stainless and copper wire brushes on hotend surfaces
  • Trim model burrs precisely with a stainless carving knife plus 5 replacement blades
  • Reach tight angles with straight and curved stainless steel tweezers for detailed cleaning
  • Keep all 42 pieces organised and portable in the included zipper tool bag

Спецификации

BrandTIOPY
ModelS-TOOL KIT
Part NumberS-TOOL KIT
ColorMulti-color
TypeS-TOOL KIT

Въпроси за този артикул

What tools and accessories are included in the 42-piece kit?

The kit contains 31 stainless steel nozzle cleaning needles in nine diameters from 0.15 mm to 0.80 mm, two wire brushes, two stainless steel tweezers, one carving knife with five replacement blades, and a zippered tool bag.

Which needle sizes should I pick for a standard 0.4 mm nozzle?

The 0.40 x 50 mm needles are sized for a 0.4 mm nozzle; the set also includes 0.35 mm and 0.50 mm needles for slightly smaller or larger openings.

How effective are the 0.40 mm needles at clearing a real-world clog?

The 0.40 x 50 mm needles match the bore of a typical 0.4 mm nozzle, allowing them to push through hardened filament and restore flow without damaging the orifice.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.