Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Black 360 mm AIO liquid cooler with square 2.4 LCD pump head, three 120 mm RGB fans, braided tubing and aluminium radiator

Valkyrie

Valkyrie Syn 360 AIO Liquid Cooler 2.4 LCD Black

SKU CH-JYCT-G3GG5

A 360 mm AIO cooler with a customisable 2.4 inch 320x240 LCD screen, triple 120 mm PWM fans reaching 2150 RPM and 80 CFM each, and broad socket support including AM5 and LGA 1700

  • TypeAIO
  • LED ColorRGB

Color Black

Option 360mm

  • Custom 2.4 LCD shows temps or GIFs at 320x240
  • Pump runs 800–2600 RPM for up to 300 W TDP
  • Three X12 fans push 80 CFM each at 29 dBA max
  • FEP braided tubing and 395 mm length resist leaks
  • Supports AM4, AM5, LGA 1700, 1200, 115x, 2011, 2066

Valkyrie Syn 360 AIO Cooler

The Valkyrie Syn 360 is an all-in-one liquid cooler built for high-performance CPUs up to 300W TDP. It targets enthusiasts who want strong thermal headroom plus a fully customisable 2.4 inch LCD pump screen for live stats or personal images. The unit fits modern AMD AM4, AM5 and Intel LGA 1700, 1200, 115x, 2011, 2011-3, 2066 sockets.

Upgrade from Air or 240 mm AIO

Moving from a standard air tower or a 240 mm radiator makes sense when sustained loads push your current cooler past its limits. The larger 360 mm surface area and triple X12 fans handle prolonged 300 W workloads with lower noise than smaller loops. If your CPU rarely exceeds 150 W, the extra capacity and LCD cost may not justify the switch.

Mounting and Common Issues

The package includes brackets for every listed socket so installation follows the usual AIO pattern: backplate, standoffs, pump block, radiator fans. Allow 395 mm tubing reach when planning radiator placement. The pump runs 800-2600 RPM and fans 800-2150 RPM via PWM; verify header current limits on older boards. The LCD requires a USB 2.0 header and the Valkyrie Hub for RGB synchronisation.

Акценти

  • Custom 2.4 LCD shows temps or GIFs at 320x240
  • Pump runs 800–2600 RPM for up to 300 W TDP
  • Three X12 fans push 80 CFM each at 29 dBA max
  • FEP braided tubing and 395 mm length resist leaks
  • Supports AM4, AM5, LGA 1700, 1200, 115x, 2011, 2066

Спецификации

TypeAIO
LED ColorRGB

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

What case clearance does the 379×120×27 mm radiator and 395 mm tubing need?

The radiator measures 379 × 120 × 27 mm and requires three 120 mm fan slots. The 395 mm FEP tubes with braided sleeve must reach from the pump to the radiator without sharp bends or kinks.

How do I mount the pump on AM5 and LGA 1700, and what step is often missed?

Use the supplied AM5/LGA 1700 bracket and backplate. Screw the bracket to the backplate first, then place the pump over the CPU with thermal paste applied, and tighten the four thumb-screws in a cross pattern. The step often missed is removing the protective film from the pump cold-plate before mounting.

When should the coolant or fans be replaced on a 300 W TDP loop?

The sealed loop is maintenance-free for its service life. If a Valkyrie X12 fan fails, replace the single 120 mm PWM unit — each runs 800-2150 RPM ±10%, 80 CFM, 29 dBA. The pump runs 800-2600 RPM ±10% at 12 V and is not user-serviceable.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.