WMtec
WMtec D3000E-S0 2900W Server Power Supply
A 2900 watt server power supply with 80 Plus Platinum efficiency for Dell Networking C9000 and C9010 systems
- Delivers up to 2900 W for demanding server workloads
- 80 Plus Platinum efficiency reduces energy waste and heat
- Wide 100-240 V input supports global rack deployments
- Dual 55 V and 3.3 V aux rails power compute and management
- Designed for Dell Networking C9000 and C9010 chassis
Server PSU for Dell C9000 and C9010
This 2900W power supply is built for Dell Networking C9000 and C9010 chassis. It accepts 100-120V or 200-240V AC input at 50/60Hz and 16A. The unit delivers a 55V main output plus a 3.3V auxiliary rail. It is a new replacement part for the D3000E-S0 and DPS-3000FB A models.
Sustained load behaviour and efficiency
At 200-240V input the supply provides up to 2900W with 52.73A on the 55V rail. At 100-120V input the maximum falls to 1450W with 26.36A on the main rail. The 3.3V auxiliary output remains at 1.0A in both ranges. An 80 Plus Platinum rating confirms high efficiency across typical server load profiles.
Deciding specification: input-voltage power limit
The single figure that determines suitability is the maximum output power tied to your AC source: 1450W at 100-120V versus 2900W at 200-240V. If the rack circuit cannot supply 200-240V the unit will not reach its rated peak. Buyers needing full 2900W capacity on low-voltage mains cannot use this PSU.
Акценти
- Delivers up to 2900 W for demanding server workloads
- 80 Plus Platinum efficiency reduces energy waste and heat
- Wide 100-240 V input supports global rack deployments
- Dual 55 V and 3.3 V aux rails power compute and management
- Designed for Dell Networking C9000 and C9010 chassis
Спецификации
Все още няма публикувани спецификации за този артикул.
Въпроси за този артикул
How loud and hot does the D3000E-S0 run when delivering 2900W continuously?
At 200-240V input the unit is rated for 2900W maximum output with 80 Plus Platinum efficiency, meaning at least 80% of input power reaches the load; the remaining energy becomes heat that the internal fan must exhaust.
What server chassis and cabling must I already have to install this D3000E-S0?
The supply is built for Dell Networking C9000 and C9010 systems; it slides into the chassis' redundant PSU bay and connects via the proprietary edge connector, so the matching Dell chassis and backplane are required.
Can I keep my existing C9000 modules and just add this D3000E-S0 for extra capacity?
Yes, the D3000E-S0 is a direct replacement or additional unit for the C9000 and C9010 platforms, sharing the same 55V main rail and 3.3V auxiliary rail pinout used by those chassis.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



