Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Black 60 by 25 mm maglev case fan with three pin connector

Zyvpee

Zyvpee KDE1206PTVX 60x25mm 3-pin 12V 2.8W maglev case fan

SKU CH-NG9S-ABWQW

A 60 mm by 25 mm maglev case fan running at 1600 to 1999 RPM on a 12 V three-pin connector and drawing 2.8 W

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM1600-1999 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Maglev bearing reduces friction for quieter operation
  • 12 V 2.8 W draw keeps power use low
  • 60 mm × 25 mm frame fits tight CPU coolers
  • 3-pin connector enables speed monitoring
  • 1600–1999 RPM range delivers focused airflow

Zyvpee KDE1206PTVX 60 mm maglev fan

The Zyvpee KDE1206PTVX is a 60 mm by 25 mm case fan designed for CPU cooler mounting. It runs on 12 V DC and draws 2.8 W through a standard three-pin power connector. The maglev bearing and black non-LED frame target builders who need a compact replacement for tight cooler stacks.

Three-pin installation and common issues

The three-pin connector plugs directly into a motherboard or fan-controller header keyed for 12 V DC. Polarity must match the header layout; reversing the plug will prevent the fan from spinning. The 60 mm screw pattern fits coolers drilled for 6025 dimensions, but the 25 mm thickness can foul adjacent memory slots or VRM heatsinks on some boards.

Sustained-load behaviour

At 1600 to 1999 RPM the fan delivers steady airflow for continuous CPU cooling loads. The maglev bearing maintains consistent speed without the wear-related slowdown seen in sleeve units over long sessions. Acoustic output remains stable because there is no physical contact to generate increasing vibration as temperature rises.

Акценти

  • Maglev bearing reduces friction for quieter operation
  • 12 V 2.8 W draw keeps power use low
  • 60 mm × 25 mm frame fits tight CPU coolers
  • 3-pin connector enables speed monitoring
  • 1600–1999 RPM range delivers focused airflow

Спецификации

BrandZyvpee
SeriesKDE1206PTVX
ModelKDE1206PTVX
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM1600-1999 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions60*25MM

Въпроси за този артикул

How can I confirm the KDE1206PTVX is spinning at the correct speed after installation?

Use BIOS or monitoring software to verify the fan runs between 1600 and 1999 RPM once the system is powered on.

What comes with the Zyvpee KDE1206PTVX and what must I supply?

The box contains the 60 mm maglev fan with a 3-pin connector; you must provide a compatible 3-pin header on the motherboard or a 3-pin to 4-pin adapter if your board only has 4-pin headers.

Which version of this fan should I choose for a 60 mm CPU cooler mount?

The KDE1206PTVX is the single 60 x 25 mm, 12 V, 2.8 W model with maglev bearing and no LED — select it when those exact specifications match your cooler’s mounting holes and power header.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.