Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

A-Tech

A-Tech 4GB DDR3 1600MHz CL11 1.5V Desktop Memory

SKU CH-KDBN-5GEN8

4GB DDR3 1600MHz CL11 1.5V 240-pin unbuffered DIMM for desktop upgrades

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • Boosts system responsiveness with 4 GB DDR3 1600 MHz capacity
  • Fits standard desktop slots using 240-pin DIMM form factor
  • Runs at standard 1.5 V DDR3 voltage for broad compatibility
  • Non-ECC unbuffered design suits mainstream AMD and Intel platforms
  • Tested at CL11 latency for reliable everyday performance

A-Tech 4GB DDR3 1600MHz Module

This single 4GB DDR3 DIMM runs at 1600MHz with CL11 latency at the standard 1.5V. It uses unbuffered, non-ECC memory built with major brand chips. The 240-pin form factor fits desktop motherboards that support DDR3 PC3-12800 specifications.

Desktop Upgrade Suitability

The module suits owners of older desktop systems needing a straightforward 4GB capacity increase for everyday multitasking. Builders requiring ECC error correction, registered buffering, higher densities per stick, or laptop SO-DIMM form factors should select different memory.

240-Pin DDR3 DIMM Form Factor

This memory uses the 240-pin DDR3 DIMM interface, which is physically and electrically distinct from later DDR generations. Verify that your motherboard specifically lists DDR3 1600MHz unbuffered non-ECC support before ordering.

Βασικά χαρακτηριστικά

  • Boosts system responsiveness with 4 GB DDR3 1600 MHz capacity
  • Fits standard desktop slots using 240-pin DIMM form factor
  • Runs at standard 1.5 V DDR3 voltage for broad compatibility
  • Non-ECC unbuffered design suits mainstream AMD and Intel platforms
  • Tested at CL11 latency for reliable everyday performance

Προδιαγραφές

BrandA-Tech
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Ερωτήσεις για αυτό το προϊόν

Does this module use a 240-pin DIMM connector?

Yes, it is a DDR3 DIMM with 240 pins, the standard desktop form factor for this generation.

What is the correct way to seat the stick so the motherboard recognises the full 4 GB?

Align the notch with the slot key, press down evenly until both side clips click shut, then verify 1600 MHz operation in the BIOS.

When should the module be replaced if errors appear?

Run a full memory test; if errors persist after reseating and cleaning the gold contacts, replace the stick.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.