Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green 240-pin DDR3 DIMM with black chips

A-Tech

A-Tech 4GB DDR3 1600MHz CL11 1.5V Desktop Memory

SKU CH-KDBN-5GEN8

4GB DDR3 1600MHz CL11 1.5V 240-pin unbuffered DIMM for desktop upgrades

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • Boosts system responsiveness with 4 GB DDR3 1600 MHz capacity
  • Fits standard desktop slots using 240-pin DIMM form factor
  • Runs at standard 1.5 V DDR3 voltage for broad compatibility
  • Non-ECC unbuffered design suits mainstream AMD and Intel platforms
  • Tested at CL11 latency for reliable everyday performance

A-Tech 4GB DDR3 1600MHz Module

This single 4GB DDR3 DIMM runs at 1600MHz with CL11 latency at the standard 1.5V. It uses unbuffered, non-ECC memory built with major brand chips. The 240-pin form factor fits desktop motherboards that support DDR3 PC3-12800 specifications.

Desktop Upgrade Suitability

The module suits owners of older desktop systems needing a straightforward 4GB capacity increase for everyday multitasking. Builders requiring ECC error correction, registered buffering, higher densities per stick, or laptop SO-DIMM form factors should select different memory.

240-Pin DDR3 DIMM Form Factor

This memory uses the 240-pin DDR3 DIMM interface, which is physically and electrically distinct from later DDR generations. Verify that your motherboard specifically lists DDR3 1600MHz unbuffered non-ECC support before ordering.

Puncte forte

  • Boosts system responsiveness with 4 GB DDR3 1600 MHz capacity
  • Fits standard desktop slots using 240-pin DIMM form factor
  • Runs at standard 1.5 V DDR3 voltage for broad compatibility
  • Non-ECC unbuffered design suits mainstream AMD and Intel platforms
  • Tested at CL11 latency for reliable everyday performance

Specificații

BrandA-Tech
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Întrebări despre acest articol

Does this module use a 240-pin DIMM connector?

Yes, it is a DDR3 DIMM with 240 pins, the standard desktop form factor for this generation.

What is the correct way to seat the stick so the motherboard recognises the full 4 GB?

Align the notch with the slot key, press down evenly until both side clips click shut, then verify 1600 MHz operation in the BIOS.

When should the module be replaced if errors appear?

Run a full memory test; if errors persist after reseating and cleaning the gold contacts, replace the stick.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.