Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

A-Tech

A-Tech 8GB DDR3 1600 ECC RDIMM 1Rx4 Server RAM

SKU CH-WMP9-S4MN6

8GB DDR3 1600 ECC registered DIMM with 1Rx4 organisation for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC registered design protects data integrity in servers
  • 1Rx4 rank optimises signal loading on registered channels
  • DDR3 1600 speed at CL11 latency supports PC3-12800 throughput
  • Standard 1.50 V DDR3 voltage matches server DIMM power rails
  • 240-pin DIMM form factor fits registered DDR3 server slots

8 GB DDR3 1600 ECC RDIMM

This module adds eight gigabytes of registered DDR3 memory running at 1600 MHz with a CAS latency of 11. It is built for servers and workstations that require error-correcting code and registered signalling for data integrity.

240-pin registered DIMM with 1Rx4 layout

The 240-pin form factor fits standard DDR3 server slots while the single-rank-by-four organisation keeps electrical loading low on populated channels. Operation at 1.5 V matches the DDR3 standard voltage for broad platform compatibility.

Direct replacement for Micron MT18JDF1G72PZ-1G6

The module matches the Micron MT18JDF1G72PZ-1G6, MT18JSF1G72PZ-1G6 and MT18JSF1G72PZ-1G6D1 part numbers. The upgrade is worthwhile when a system needs additional ECC capacity or when existing modules have reached their limit.

Βασικά χαρακτηριστικά

  • ECC registered design protects data integrity in servers
  • 1Rx4 rank optimises signal loading on registered channels
  • DDR3 1600 speed at CL11 latency supports PC3-12800 throughput
  • Standard 1.50 V DDR3 voltage matches server DIMM power rails
  • 240-pin DIMM form factor fits registered DDR3 server slots

Προδιαγραφές

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Ερωτήσεις για αυτό το προϊόν

What DDR3 speed and PC rating does this 8 GB RDIMM use?

It runs at DDR3 1600 MHz and carries a PC3-12800 rating, delivering standard DDR3 1600 performance for registered server memory.

Which slot type and pin count does this module need to fit?

It requires a 240-pin DDR3 DIMM slot, the standard form factor for registered DDR3 server memory.

How do I install this ECC RDIMM correctly?

Power off the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retaining clips click, then verify the full 8 GB appears in the BIOS or OS memory report.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.