Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3 server memory module with black chips and silver heat spreader

A-Tech

A-Tech 8GB DDR3 1600 ECC RDIMM 1Rx4 Server RAM

SKU CH-WMP9-S4MN6

8GB DDR3 1600 ECC registered DIMM with 1Rx4 organisation for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC registered design protects data integrity in servers
  • 1Rx4 rank optimises signal loading on registered channels
  • DDR3 1600 speed at CL11 latency supports PC3-12800 throughput
  • Standard 1.50 V DDR3 voltage matches server DIMM power rails
  • 240-pin DIMM form factor fits registered DDR3 server slots

8 GB DDR3 1600 ECC RDIMM

This module adds eight gigabytes of registered DDR3 memory running at 1600 MHz with a CAS latency of 11. It is built for servers and workstations that require error-correcting code and registered signalling for data integrity.

240-pin registered DIMM with 1Rx4 layout

The 240-pin form factor fits standard DDR3 server slots while the single-rank-by-four organisation keeps electrical loading low on populated channels. Operation at 1.5 V matches the DDR3 standard voltage for broad platform compatibility.

Direct replacement for Micron MT18JDF1G72PZ-1G6

The module matches the Micron MT18JDF1G72PZ-1G6, MT18JSF1G72PZ-1G6 and MT18JSF1G72PZ-1G6D1 part numbers. The upgrade is worthwhile when a system needs additional ECC capacity or when existing modules have reached their limit.

Pluspunten

  • ECC registered design protects data integrity in servers
  • 1Rx4 rank optimises signal loading on registered channels
  • DDR3 1600 speed at CL11 latency supports PC3-12800 throughput
  • Standard 1.50 V DDR3 voltage matches server DIMM power rails
  • 240-pin DIMM form factor fits registered DDR3 server slots

Specificaties

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

What DDR3 speed and PC rating does this 8 GB RDIMM use?

It runs at DDR3 1600 MHz and carries a PC3-12800 rating, delivering standard DDR3 1600 performance for registered server memory.

Which slot type and pin count does this module need to fit?

It requires a 240-pin DDR3 DIMM slot, the standard form factor for registered DDR3 server memory.

How do I install this ECC RDIMM correctly?

Power off the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retaining clips click, then verify the full 8 GB appears in the BIOS or OS memory report.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.