Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green 240-pin DDR3 server memory module with black chips and silver heat spreader

A-Tech

A-Tech 8GB DDR3 1600 ECC RDIMM 1Rx4 Server RAM

SKU CH-WMP9-S4MN6

8GB DDR3 1600 ECC registered DIMM with 1Rx4 organisation for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC registered design protects data integrity in servers
  • 1Rx4 rank optimises signal loading on registered channels
  • DDR3 1600 speed at CL11 latency supports PC3-12800 throughput
  • Standard 1.50 V DDR3 voltage matches server DIMM power rails
  • 240-pin DIMM form factor fits registered DDR3 server slots

8 GB DDR3 1600 ECC RDIMM

This module adds eight gigabytes of registered DDR3 memory running at 1600 MHz with a CAS latency of 11. It is built for servers and workstations that require error-correcting code and registered signalling for data integrity.

240-pin registered DIMM with 1Rx4 layout

The 240-pin form factor fits standard DDR3 server slots while the single-rank-by-four organisation keeps electrical loading low on populated channels. Operation at 1.5 V matches the DDR3 standard voltage for broad platform compatibility.

Direct replacement for Micron MT18JDF1G72PZ-1G6

The module matches the Micron MT18JDF1G72PZ-1G6, MT18JSF1G72PZ-1G6 and MT18JSF1G72PZ-1G6D1 part numbers. The upgrade is worthwhile when a system needs additional ECC capacity or when existing modules have reached their limit.

Prednosti

  • ECC registered design protects data integrity in servers
  • 1Rx4 rank optimises signal loading on registered channels
  • DDR3 1600 speed at CL11 latency supports PC3-12800 throughput
  • Standard 1.50 V DDR3 voltage matches server DIMM power rails
  • 240-pin DIMM form factor fits registered DDR3 server slots

Špecifikácie

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

What DDR3 speed and PC rating does this 8 GB RDIMM use?

It runs at DDR3 1600 MHz and carries a PC3-12800 rating, delivering standard DDR3 1600 performance for registered server memory.

Which slot type and pin count does this module need to fit?

It requires a 240-pin DDR3 DIMM slot, the standard form factor for registered DDR3 server memory.

How do I install this ECC RDIMM correctly?

Power off the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retaining clips click, then verify the full 8 GB appears in the BIOS or OS memory report.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.