Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Grey 405 nm photopolymer resin in a 1 kg bottle

ApexMaker

ApexMaker High Speed 3D Printer Resin 405nm Grey 1KG

SKU CH-AAVD-TGQN2

Grey 405 nm photopolymer resin formulated for low shrinkage and fast curing on 2K, 4K and 8K LCD, DLP and SLA printers

  • Colorgrey
  • Prints up to three times faster than standard resins thanks to low viscosity and high reactivity
  • Reduces overall print time with a new formula designed for large models
  • Maintains dimensional accuracy through rapid heat dissipation and fast resin reflux
  • Delivers rigid, detail-rich parts that resist deformation during printing
  • Compatible with 2K, 4K and 8K LCD, DLP and SLA printers using 405 nm light

Fast-Curing Grey Resin for High-Speed LCD Printers

This 405 nm photopolymer is formulated for ultra-fast exposure on 2K, 4K and 8K LCD, DLP and SLA machines. Its low viscosity cuts curing time dramatically, so makers producing large batches or oversized models finish jobs in a fraction of the usual cycle. The grey colour gives neutral contrast for detail inspection straight off the build plate.

405 nm Wavelength Compatibility

The single specification that decides fit is the 405 nm curing wavelength; the resin will only polymerise correctly on printers whose light source matches that figure. If your machine uses a different wavelength the material will not cure, regardless of brand or screen resolution. Always verify the printer’s light specification before purchasing.

One-Kilogram Bottle Capacity

One kilogram of liquid resin typically yields several hundred grams of finished parts, enough for multiple large prototypes or dozens of small miniatures before a refill is needed. Headroom runs out when print volume exceeds the bottle’s total mass or when ambient temperature drops far below room level, slowing flow and increasing exposure times.

Βασικά χαρακτηριστικά

  • Prints up to three times faster than standard resins thanks to low viscosity and high reactivity
  • Reduces overall print time with a new formula designed for large models
  • Maintains dimensional accuracy through rapid heat dissipation and fast resin reflux
  • Delivers rigid, detail-rich parts that resist deformation during printing
  • Compatible with 2K, 4K and 8K LCD, DLP and SLA printers using 405 nm light

Προδιαγραφές

Colorgrey

Ερωτήσεις για αυτό το προϊόν

How does the 405 nm wavelength affect curing speed on my LCD printer?

The resin is formulated for 405 nm light sources, so it cures rapidly under standard LCD, DLP and SLA printers without needing special wavelength settings.

Which printer types are compatible with this 405 nm resin?

It works with 2K, 4K and 8K LCD, DLP and SLA printers that expose at 405 nm, covering most current desktop machines.

What bottle size and colour should I expect when it arrives?

You receive a 1 kg bottle of grey photopolymer resin, sealed and opaque to protect the material from light exposure.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.