暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Grey 405 nm photopolymer resin in a 1 kg bottle

ApexMaker

ApexMaker High Speed 3D Printer Resin 405nm Grey 1KG

SKU CH-AAVD-TGQN2

Grey 405 nm photopolymer resin formulated for low shrinkage and fast curing on 2K, 4K and 8K LCD, DLP and SLA printers

  • Colorgrey
  • Prints up to three times faster than standard resins thanks to low viscosity and high reactivity
  • Reduces overall print time with a new formula designed for large models
  • Maintains dimensional accuracy through rapid heat dissipation and fast resin reflux
  • Delivers rigid, detail-rich parts that resist deformation during printing
  • Compatible with 2K, 4K and 8K LCD, DLP and SLA printers using 405 nm light

Fast-Curing Grey Resin for High-Speed LCD Printers

This 405 nm photopolymer is formulated for ultra-fast exposure on 2K, 4K and 8K LCD, DLP and SLA machines. Its low viscosity cuts curing time dramatically, so makers producing large batches or oversized models finish jobs in a fraction of the usual cycle. The grey colour gives neutral contrast for detail inspection straight off the build plate.

405 nm Wavelength Compatibility

The single specification that decides fit is the 405 nm curing wavelength; the resin will only polymerise correctly on printers whose light source matches that figure. If your machine uses a different wavelength the material will not cure, regardless of brand or screen resolution. Always verify the printer’s light specification before purchasing.

One-Kilogram Bottle Capacity

One kilogram of liquid resin typically yields several hundred grams of finished parts, enough for multiple large prototypes or dozens of small miniatures before a refill is needed. Headroom runs out when print volume exceeds the bottle’s total mass or when ambient temperature drops far below room level, slowing flow and increasing exposure times.

特長

  • Prints up to three times faster than standard resins thanks to low viscosity and high reactivity
  • Reduces overall print time with a new formula designed for large models
  • Maintains dimensional accuracy through rapid heat dissipation and fast resin reflux
  • Delivers rigid, detail-rich parts that resist deformation during printing
  • Compatible with 2K, 4K and 8K LCD, DLP and SLA printers using 405 nm light

仕様

Colorgrey

この商品に関する質問

How does the 405 nm wavelength affect curing speed on my LCD printer?

The resin is formulated for 405 nm light sources, so it cures rapidly under standard LCD, DLP and SLA printers without needing special wavelength settings.

Which printer types are compatible with this 405 nm resin?

It works with 2K, 4K and 8K LCD, DLP and SLA printers that expose at 405 nm, covering most current desktop machines.

What bottle size and colour should I expect when it arrives?

You receive a 1 kg bottle of grey photopolymer resin, sealed and opaque to protect the material from light exposure.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。