Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Grey 405 nm photopolymer resin in a 1 kg bottle

ApexMaker

ApexMaker High Speed 3D Printer Resin 405nm Grey 1KG

SKU CH-AAVD-TGQN2

Grey 405 nm photopolymer resin formulated for low shrinkage and fast curing on 2K, 4K and 8K LCD, DLP and SLA printers

  • Colorgrey
  • Prints up to three times faster than standard resins thanks to low viscosity and high reactivity
  • Reduces overall print time with a new formula designed for large models
  • Maintains dimensional accuracy through rapid heat dissipation and fast resin reflux
  • Delivers rigid, detail-rich parts that resist deformation during printing
  • Compatible with 2K, 4K and 8K LCD, DLP and SLA printers using 405 nm light

Fast-Curing Grey Resin for High-Speed LCD Printers

This 405 nm photopolymer is formulated for ultra-fast exposure on 2K, 4K and 8K LCD, DLP and SLA machines. Its low viscosity cuts curing time dramatically, so makers producing large batches or oversized models finish jobs in a fraction of the usual cycle. The grey colour gives neutral contrast for detail inspection straight off the build plate.

405 nm Wavelength Compatibility

The single specification that decides fit is the 405 nm curing wavelength; the resin will only polymerise correctly on printers whose light source matches that figure. If your machine uses a different wavelength the material will not cure, regardless of brand or screen resolution. Always verify the printer’s light specification before purchasing.

One-Kilogram Bottle Capacity

One kilogram of liquid resin typically yields several hundred grams of finished parts, enough for multiple large prototypes or dozens of small miniatures before a refill is needed. Headroom runs out when print volume exceeds the bottle’s total mass or when ambient temperature drops far below room level, slowing flow and increasing exposure times.

Kohokohdat

  • Prints up to three times faster than standard resins thanks to low viscosity and high reactivity
  • Reduces overall print time with a new formula designed for large models
  • Maintains dimensional accuracy through rapid heat dissipation and fast resin reflux
  • Delivers rigid, detail-rich parts that resist deformation during printing
  • Compatible with 2K, 4K and 8K LCD, DLP and SLA printers using 405 nm light

Tekniset tiedot

Colorgrey

Kysymyksiä tästä tuotteesta

How does the 405 nm wavelength affect curing speed on my LCD printer?

The resin is formulated for 405 nm light sources, so it cures rapidly under standard LCD, DLP and SLA printers without needing special wavelength settings.

Which printer types are compatible with this 405 nm resin?

It works with 2K, 4K and 8K LCD, DLP and SLA printers that expose at 405 nm, covering most current desktop machines.

What bottle size and colour should I expect when it arrives?

You receive a 1 kg bottle of grey photopolymer resin, sealed and opaque to protect the material from light exposure.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.