Silver rectangular 1U server power supply unit with rear connector panel

Athena Power

Athena Power M1K2-5A00V4H 1000W 1U redundant server power supply

SKU CH-GV7Q-381C8 MPN M1K2-5A00V4H

A 1U redundant 1000W server supply with dual EPS, PCIe, SATA and Molex outputs

Single/RedundantRedundant
Maximum Power1000W
Main ConnectorATX Connector 24 (20+4) pin x 1 P4-12V 4 Pin x 1 EPS 12V 8 P
Output Current+3.3V@22A, +5V@22A,+12V@83A, +5Vsb@3A, [email protected]
Input Voltage88 - 264 V
Input Frequency Range47 - 63 Hz

Redundant design keeps systems running during module failure
1000W output powers dense 1U server configurations
Wide 88-264V input range supports global deployment
100,000-hour MTBF at 25°C indicates long service life
Multiple EPS, PCIe, SATA and Molex connectors fit varied builds

720,99 $

0.00924453 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

1000W Redundant 1U Server Power Supply

This 1000 watt redundant power supply fits a 1U server chassis and delivers up to 83 amps on the +12 volt rail. It accepts a universal 88 to 264 volt input at 47 to 63 hertz and is rated for 100,000 hours MTBF at 25 degrees Celsius. The unit weighs 10.00 lbs and measures 1.63 by 4.17 by 15.75 inches.

Who This Suits and Who Should Look Elsewhere

It suits administrators building or repairing a redundant server platform that requires dual EPS 12V 8-pin connectors and PCIe 6+2 pin power for add-in cards. Buyers who need higher total output or a non-redundant single-module design should look elsewhere.

Deciding Specification — Connector Complement

The fixed cable set includes one ATX 24-pin, one P4 4-pin, two EPS 8-pin, two PCIe 6+2-pin, three SATA 15-pin and three Molex 4-pin connectors. Verify that this exact combination matches the motherboard and drive configuration before purchase.

Βασικά χαρακτηριστικά

Redundant design keeps systems running during module failure
1000W output powers dense 1U server configurations
Wide 88-264V input range supports global deployment
100,000-hour MTBF at 25°C indicates long service life
Multiple EPS, PCIe, SATA and Molex connectors fit varied builds

Προδιαγραφές

Brand	Athena Power
Model	M1K2-5A00V4H
Single/Redundant	Redundant
Maximum Power	1000W
Main Connector	ATX Connector 24 (20+4) pin x 1 P4-12V 4 Pin x 1 EPS 12V 8 Pin x 2 PCIE 6+2 Pin x 2 SATA 15 Pin x 3 Molex 4 Pin x 3
Output Current	+3.3V@22A, +5V@22A,+12V@83A, +5Vsb@3A, [email protected]
Input Voltage	88 - 264 V
Input Frequency Range	47 - 63 Hz
MTBF	100,000 Hours on Maximum Load at +25 degree C
Hold-up Time	10 ms Minimum at Nominal Input Voltage
Features	Rise time: Less than 20 ms
Dimensions	1.63" x 4.17" x 15.75"
Weight	10.00 lbs.
Temperature	Operating: 0 degree C ~ +50 degree C on Full Load; Storage & Shipping: -20 degree C ~ +80 degree C
Βάρος αποστολής	4.60 kg
Διαστάσεις συσκευασίας	610 × 213 × 132 mm

Ερωτήσεις για αυτό το προϊόν

How much heat and noise does the 1000W redundant unit produce when running continuously at full load?

The supply is rated for 0°C to 50°C operating temperature at full load with an MTBF of 100,000 hours at 25°C, indicating sustained thermal performance.

What existing server chassis and cabling are required to install this 1U redundant power supply?

It fits a standard 1U rack bay measuring 1.63" x 4.17" x 15.75" and connects via a 24-pin ATX, one 4-pin P4, two 8-pin EPS, two 6+2-pin PCIe, three SATA and three Molex leads.

Will this power supply work with older motherboards that only have a 20-pin main connector and 4-pin CPU power?

Yes, the 24-pin ATX connector splits into 20+4 pins and the two 8-pin EPS connectors each separate into 4+4 pins for legacy boards.

Επίσης σε αυτό το ράφι