저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Athena Power

Athena Power M1K2-5A00V4H 1000W 1U redundant server power supply

SKU CH-GV7Q-381C8 MPN M1K2-5A00V4H

A 1U redundant 1000W server supply with dual EPS, PCIe, SATA and Molex outputs

  • Single/RedundantRedundant
  • Maximum Power1000W
  • Main ConnectorATX Connector 24 (20+4) pin x 1 P4-12V 4 Pin x 1 EPS 12V 8 P
  • Output Current+3.3V@22A, +5V@22A,+12V@83A, +5Vsb@3A, [email protected]
  • Input Voltage88 - 264 V
  • Input Frequency Range47 - 63 Hz
  • Redundant design keeps systems running during module failure
  • 1000W output powers dense 1U server configurations
  • Wide 88-264V input range supports global deployment
  • 100,000-hour MTBF at 25°C indicates long service life
  • Multiple EPS, PCIe, SATA and Molex connectors fit varied builds

1000W Redundant 1U Server Power Supply

This 1000 watt redundant power supply fits a 1U server chassis and delivers up to 83 amps on the +12 volt rail. It accepts a universal 88 to 264 volt input at 47 to 63 hertz and is rated for 100,000 hours MTBF at 25 degrees Celsius. The unit weighs 10.00 lbs and measures 1.63 by 4.17 by 15.75 inches.

Who This Suits and Who Should Look Elsewhere

It suits administrators building or repairing a redundant server platform that requires dual EPS 12V 8-pin connectors and PCIe 6+2 pin power for add-in cards. Buyers who need higher total output or a non-redundant single-module design should look elsewhere.

Deciding Specification — Connector Complement

The fixed cable set includes one ATX 24-pin, one P4 4-pin, two EPS 8-pin, two PCIe 6+2-pin, three SATA 15-pin and three Molex 4-pin connectors. Verify that this exact combination matches the motherboard and drive configuration before purchase.

주요 특징

  • Redundant design keeps systems running during module failure
  • 1000W output powers dense 1U server configurations
  • Wide 88-264V input range supports global deployment
  • 100,000-hour MTBF at 25°C indicates long service life
  • Multiple EPS, PCIe, SATA and Molex connectors fit varied builds

사양

BrandAthena Power
ModelM1K2-5A00V4H
Single/RedundantRedundant
Maximum Power1000W
Main ConnectorATX Connector 24 (20+4) pin x 1
P4-12V 4 Pin x 1
EPS 12V 8 Pin x 2
PCIE 6+2 Pin x 2
SATA 15 Pin x 3
Molex 4 Pin x 3
Output Current+3.3V@22A, +5V@22A,+12V@83A, +5Vsb@3A, [email protected]
Input Voltage88 - 264 V
Input Frequency Range47 - 63 Hz
MTBF100,000 Hours on Maximum Load at +25 degree C
Hold-up Time10 ms Minimum at Nominal Input Voltage
FeaturesRise time: Less than 20 ms
Dimensions1.63" x 4.17" x 15.75"
Weight10.00 lbs.
TemperatureOperating: 0 degree C ~ +50 degree C on Full Load;
Storage & Shipping: -20 degree C ~ +80 degree C
배송 무게4.60 kg
포장 크기610 × 213 × 132 mm

이 상품에 대한 질문

How much heat and noise does the 1000W redundant unit produce when running continuously at full load?

The supply is rated for 0°C to 50°C operating temperature at full load with an MTBF of 100,000 hours at 25°C, indicating sustained thermal performance.

What existing server chassis and cabling are required to install this 1U redundant power supply?

It fits a standard 1U rack bay measuring 1.63" x 4.17" x 15.75" and connects via a 24-pin ATX, one 4-pin P4, two 8-pin EPS, two 6+2-pin PCIe, three SATA and three Molex leads.

Will this power supply work with older motherboards that only have a 20-pin main connector and 4-pin CPU power?

Yes, the 24-pin ATX connector splits into 20+4 pins and the two 8-pin EPS connectors each separate into 4+4 pins for legacy boards.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.