SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $US
0.00501831BTC
En stock
Athena Power
Athena Power M1K2-5A00V4H 1000W 1U redundant server power supply
A 1U redundant 1000W server supply with dual EPS, PCIe, SATA and Molex outputs
- Single/RedundantRedundant
- Maximum Power1000W
- Main ConnectorATX Connector 24 (20+4) pin x 1 P4-12V 4 Pin x 1 EPS 12V 8 P
- Output Current+3.3V@22A, +5V@22A,+12V@83A, +5Vsb@3A, [email protected]
- Input Voltage88 - 264 V
- Input Frequency Range47 - 63 Hz
- Redundant design keeps systems running during module failure
- 1000W output powers dense 1U server configurations
- Wide 88-264V input range supports global deployment
- 100,000-hour MTBF at 25°C indicates long service life
- Multiple EPS, PCIe, SATA and Molex connectors fit varied builds
1000W Redundant 1U Server Power Supply
This 1000 watt redundant power supply fits a 1U server chassis and delivers up to 83 amps on the +12 volt rail. It accepts a universal 88 to 264 volt input at 47 to 63 hertz and is rated for 100,000 hours MTBF at 25 degrees Celsius. The unit weighs 10.00 lbs and measures 1.63 by 4.17 by 15.75 inches.
Who This Suits and Who Should Look Elsewhere
It suits administrators building or repairing a redundant server platform that requires dual EPS 12V 8-pin connectors and PCIe 6+2 pin power for add-in cards. Buyers who need higher total output or a non-redundant single-module design should look elsewhere.
Deciding Specification — Connector Complement
The fixed cable set includes one ATX 24-pin, one P4 4-pin, two EPS 8-pin, two PCIe 6+2-pin, three SATA 15-pin and three Molex 4-pin connectors. Verify that this exact combination matches the motherboard and drive configuration before purchase.
Points forts
- Redundant design keeps systems running during module failure
- 1000W output powers dense 1U server configurations
- Wide 88-264V input range supports global deployment
- 100,000-hour MTBF at 25°C indicates long service life
- Multiple EPS, PCIe, SATA and Molex connectors fit varied builds
Caractéristiques
| Brand | Athena Power |
|---|---|
| Model | M1K2-5A00V4H |
| Single/Redundant | Redundant |
| Maximum Power | 1000W |
| Main Connector | ATX Connector 24 (20+4) pin x 1 P4-12V 4 Pin x 1 EPS 12V 8 Pin x 2 PCIE 6+2 Pin x 2 SATA 15 Pin x 3 Molex 4 Pin x 3 |
| Output Current | +3.3V@22A, +5V@22A,+12V@83A, +5Vsb@3A, [email protected] |
| Input Voltage | 88 - 264 V |
| Input Frequency Range | 47 - 63 Hz |
| MTBF | 100,000 Hours on Maximum Load at +25 degree C |
| Hold-up Time | 10 ms Minimum at Nominal Input Voltage |
| Features | Rise time: Less than 20 ms |
| Dimensions | 1.63" x 4.17" x 15.75" |
| Weight | 10.00 lbs. |
| Temperature | Operating: 0 degree C ~ +50 degree C on Full Load; Storage & Shipping: -20 degree C ~ +80 degree C |
| Poids d’expédition | 4.60 kg |
| Dimensions du colis | 610 × 213 × 132 mm |
Questions sur cet article
How much heat and noise does the 1000W redundant unit produce when running continuously at full load?
The supply is rated for 0°C to 50°C operating temperature at full load with an MTBF of 100,000 hours at 25°C, indicating sustained thermal performance.
What existing server chassis and cabling are required to install this 1U redundant power supply?
It fits a standard 1U rack bay measuring 1.63" x 4.17" x 15.75" and connects via a 24-pin ATX, one 4-pin P4, two 8-pin EPS, two 6+2-pin PCIe, three SATA and three Molex leads.
Will this power supply work with older motherboards that only have a 20-pin main connector and 4-pin CPU power?
Yes, the 24-pin ATX connector splits into 20+4 pins and the two 8-pin EPS connectors each separate into 4+4 pins for legacy boards.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 $US
0.00096003BTC
En stock