Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

DELL

DELL ST6000NM0014 6TB 7200RPM 12Gb/s SAS 3.5in internal hard drive

SKU CH-Q387-52NHR

A 6 TB enterprise SAS drive spinning at 7200 RPM with a 12 Gb/s interface, supplied with an R-series hot-swap caddy for 3.5-inch server bays

  • 6 TB capacity stores large data sets
  • 7200 RPM rotational speed delivers fast sequential access
  • 12 Gb/s SAS interface supports high-throughput workloads
  • 5 inch form factor fits standard server bays
  • Includes R Series caddy for hot-swap installation

Dell 6TB 12Gb/s SAS enterprise drive

This Dell 6TB drive spins at 7200RPM and connects through a 12Gb/s SAS interface in a 3.5in form factor. It is supplied new with an R Series caddy for hot-swap bays. The 4Kn sector format suits modern storage arrays.

Suited to SAS storage servers and arrays

Buyers expanding a SAS-based server or JBOD that accepts 3.5in hot-swap trays will find the correct interface and carrier included. Systems without a SAS controller or backplane cannot use this drive. Workloads needing SSD latency or higher areal density should consider other media.

The 12Gb/s SAS interface decides compatibility

A host bus adapter or RAID card with 12Gb/s SAS ports is required for the drive to operate at its rated speed. The 4Kn logical block size also demands operating-system and controller support. Verify both before purchase.

Βασικά χαρακτηριστικά

  • 6 TB capacity stores large data sets
  • 7200 RPM rotational speed delivers fast sequential access
  • 12 Gb/s SAS interface supports high-throughput workloads
  • 5 inch form factor fits standard server bays
  • Includes R Series caddy for hot-swap installation

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

What caddy or tray is included for mounting the 3.5in SAS drive?

The drive ships with an R Series caddy/tray designed for Dell server bays.

How is the drive installed in a hot-swap bay, and what step is often missed?

Slide the caddied drive into the bay until the SAS connector seats firmly; many forget to push past the detent until the latch clicks.

What component may need replacement after extended 7200RPM operation?

The spindle motor bearings can wear after years of continuous rotation, requiring full drive replacement.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.