暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive with black Dell caddy tray

DELL

DELL ST6000NM0014 6TB 7200RPM 12Gb/s SAS 3.5in internal hard drive

SKU CH-Q387-52NHR

A 6 TB enterprise SAS drive spinning at 7200 RPM with a 12 Gb/s interface, supplied with an R-series hot-swap caddy for 3.5-inch server bays

  • 6 TB capacity stores large data sets
  • 7200 RPM rotational speed delivers fast sequential access
  • 12 Gb/s SAS interface supports high-throughput workloads
  • 5 inch form factor fits standard server bays
  • Includes R Series caddy for hot-swap installation

Dell 6TB 12Gb/s SAS enterprise drive

This Dell 6TB drive spins at 7200RPM and connects through a 12Gb/s SAS interface in a 3.5in form factor. It is supplied new with an R Series caddy for hot-swap bays. The 4Kn sector format suits modern storage arrays.

Suited to SAS storage servers and arrays

Buyers expanding a SAS-based server or JBOD that accepts 3.5in hot-swap trays will find the correct interface and carrier included. Systems without a SAS controller or backplane cannot use this drive. Workloads needing SSD latency or higher areal density should consider other media.

The 12Gb/s SAS interface decides compatibility

A host bus adapter or RAID card with 12Gb/s SAS ports is required for the drive to operate at its rated speed. The 4Kn logical block size also demands operating-system and controller support. Verify both before purchase.

特長

  • 6 TB capacity stores large data sets
  • 7200 RPM rotational speed delivers fast sequential access
  • 12 Gb/s SAS interface supports high-throughput workloads
  • 5 inch form factor fits standard server bays
  • Includes R Series caddy for hot-swap installation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What caddy or tray is included for mounting the 3.5in SAS drive?

The drive ships with an R Series caddy/tray designed for Dell server bays.

How is the drive installed in a hot-swap bay, and what step is often missed?

Slide the caddied drive into the bay until the SAS connector seats firmly; many forget to push past the detent until the latch clicks.

What component may need replacement after extended 7200RPM operation?

The spindle motor bearings can wear after years of continuous rotation, requiring full drive replacement.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。