Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Three clear 120mm ARGB fans with dual LED rings a black hub and a small remote

E-POWER

E-POWER EP-FAN-1RGB3 120mm ARGB case fan 3-pack with 10-port hub and RF remote

SKU CH-C41J-Q2XTQ

Three 120 mm ARGB fans with dual LED rings, a 10-port hub, two LED-strip ports and an RF remote for motherboard-synced lighting

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeHydraulic
  • RPM<1600 RPM
  • Air Flow30-35 CFM
  • Noise Level20 - 25 dBA
  • Quiet operation at 20 to 25 dBA with hydraulic bearing
  • Dual ARGB LED rings sync via motherboard or RF remote
  • Three 120 mm fans deliver 30 to 35 CFM airflow each
  • 10-port fan hub plus 2-port LED strip hub simplifies wiring
  • LED switch lets you disable lighting without software

Three 120 mm ARGB fans with hub and remote

This pack supplies three 120 mm case fans that use hydraulic bearings and dual LED rings for addressable RGB lighting. Each fan spins up to 1600 RPM and moves 30 to 35 CFM while staying between 20 and 25 dBA. A 10-port hub handles power for up to ten fans plus two LED strips, and an RF remote gives wireless control over colours and effects.

Builders who want synchronised lighting

The included hub reduces cable clutter by centralising fan and strip power, and motherboard sync lets the lights follow board software. The RF remote works without line of sight, so adjustments are easy after the case is closed. Systems that rely on 4-pin PWM headers alone will need an adapter because these fans use a 6-pin connector for the hub.

6-pin hub connector dictates motherboard

The fans draw 12 V power through the supplied hub, which connects to the board via a single 6-pin plug. If your motherboard lacks a matching 6-pin header or a compatible controller, the pack cannot be used without an additional adapter. Verify the header type before purchase.

Βασικά χαρακτηριστικά

  • Quiet operation at 20 to 25 dBA with hydraulic bearing
  • Dual ARGB LED rings sync via motherboard or RF remote
  • Three 120 mm fans deliver 30 to 35 CFM airflow each
  • 10-port fan hub plus 2-port LED strip hub simplifies wiring
  • LED switch lets you disable lighting without software

Προδιαγραφές

BrandE-POWER
SeriesARGB
ModelEP-FAN-1RGB3
TypeCase Fan
CompatibilityCase
Bearing TypeHydraulic
RPM<1600 RPM
Air Flow30-35 CFM
Noise Level20 - 25 dBA
Power Connector6 PIN
ColorClear
LEDARGB
Dimensions120 x 120 x 25 mm

Ερωτήσεις για αυτό το προϊόν

Does the 3-pack include the 10-port hub and RF remote, or do I need to buy them separately?

The package contains three 120 mm ARGB fans, a 10-port fan and 2-port LED strip hub, and an RF remote — nothing extra is required.

Which bearing type should I choose for quiet 20–25 dBA operation?

These fans use a hydraulic bearing rated for 20–25 dBA at up to 1600 RPM.

What airflow can I expect from the 30–35 CFM rating once the fans are installed in my case?

Each fan delivers 30–35 CFM through a 120 x 120 x 25 mm frame at up to 1600 RPM.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.