E-POWER
E-POWER EP-FAN-1RGB3 120mm ARGB case fan 3-pack with 10-port hub and RF remote
Three 120 mm ARGB fans with dual LED rings, a 10-port hub, two LED-strip ports and an RF remote for motherboard-synced lighting
- TypeCase Fan
- CompatibilityCase
- Bearing TypeHydraulic
- RPM<1600 RPM
- Air Flow30-35 CFM
- Noise Level20 - 25 dBA
- Quiet operation at 20 to 25 dBA with hydraulic bearing
- Dual ARGB LED rings sync via motherboard or RF remote
- Three 120 mm fans deliver 30 to 35 CFM airflow each
- 10-port fan hub plus 2-port LED strip hub simplifies wiring
- LED switch lets you disable lighting without software
Three 120 mm ARGB fans with hub and remote
This pack supplies three 120 mm case fans that use hydraulic bearings and dual LED rings for addressable RGB lighting. Each fan spins up to 1600 RPM and moves 30 to 35 CFM while staying between 20 and 25 dBA. A 10-port hub handles power for up to ten fans plus two LED strips, and an RF remote gives wireless control over colours and effects.
Builders who want synchronised lighting
The included hub reduces cable clutter by centralising fan and strip power, and motherboard sync lets the lights follow board software. The RF remote works without line of sight, so adjustments are easy after the case is closed. Systems that rely on 4-pin PWM headers alone will need an adapter because these fans use a 6-pin connector for the hub.
6-pin hub connector dictates motherboard
The fans draw 12 V power through the supplied hub, which connects to the board via a single 6-pin plug. If your motherboard lacks a matching 6-pin header or a compatible controller, the pack cannot be used without an additional adapter. Verify the header type before purchase.
Přednosti
- Quiet operation at 20 to 25 dBA with hydraulic bearing
- Dual ARGB LED rings sync via motherboard or RF remote
- Three 120 mm fans deliver 30 to 35 CFM airflow each
- 10-port fan hub plus 2-port LED strip hub simplifies wiring
- LED switch lets you disable lighting without software
Specifikace
| Brand | E-POWER |
|---|---|
| Series | ARGB |
| Model | EP-FAN-1RGB3 |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Hydraulic |
| RPM | <1600 RPM |
| Air Flow | 30-35 CFM |
| Noise Level | 20 - 25 dBA |
| Power Connector | 6 PIN |
| Color | Clear |
| LED | ARGB |
| Dimensions | 120 x 120 x 25 mm |
Otázky k tomuto produktu
Does the 3-pack include the 10-port hub and RF remote, or do I need to buy them separately?
The package contains three 120 mm ARGB fans, a 10-port fan and 2-port LED strip hub, and an RF remote — nothing extra is required.
Which bearing type should I choose for quiet 20–25 dBA operation?
These fans use a hydraulic bearing rated for 20–25 dBA at up to 1600 RPM.
What airflow can I expect from the 30–35 CFM rating once the fans are installed in my case?
Each fan delivers 30–35 CFM through a 120 x 120 x 25 mm frame at up to 1600 RPM.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
