E-POWER EP-FAN-1RGB3 120mm ARGB case fan 3-pack with 10-port hub and RF remote

Three 120 mm ARGB fans with hub and remote

This pack supplies three 120 mm case fans that use hydraulic bearings and dual LED rings for addressable RGB lighting. Each fan spins up to 1600 RPM and moves 30 to 35 CFM while staying between 20 and 25 dBA. A 10-port hub handles power for up to ten fans plus two LED strips, and an RF remote gives wireless control over colours and effects.

Builders who want synchronised lighting

The included hub reduces cable clutter by centralising fan and strip power, and motherboard sync lets the lights follow board software. The RF remote works without line of sight, so adjustments are easy after the case is closed. Systems that rely on 4-pin PWM headers alone will need an adapter because these fans use a 6-pin connector for the hub.

6-pin hub connector dictates motherboard

The fans draw 12 V power through the supplied hub, which connects to the board via a single 6-pin plug. If your motherboard lacks a matching 6-pin header or a compatible controller, the pack cannot be used without an additional adapter. Verify the header type before purchase.