Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

Enfain

Enfain OM3 LC-ST Duplex Multimode Fibre Optic Cable Aqua Blue

SKU CH-393B-S0F9Y

Aqua duplex patch cord with LC and ST connectors carries 10 Gbit multimode signals at 850 nm over a 3.0 mm jacket

Length 1m

  • OM3 core supports 10 gigabit multimode transmission
  • Duplex LC-ST connectors link switches and servers
  • 0 mm PVC jacket protects the fibre
  • Typical insertion loss 0.2 dB, maximum 0.3 dB
  • Return loss exceeds 38 dB for clean signals

LC-ST Duplex Multimode Patch Cable

The Enfain OM3 cable provides a 10-gigabit multimode link between equipment with LC and ST connectors. It suits data-centre, server-room or switch-to-server connections that require duplex fibre in a single assembly.

Thermals, Noise and Power Draw

Passive fibre carries no electrical current, so the cable adds no heat, no fan noise and no power draw to the rack. It operates reliably from -20 °C to +60 °C and tolerates a 330 mm bending radius during routing.

Build Integration

The 3.0 mm PVC jacket protects the duplex cores while remaining flexible enough for dense patch panels. Ceramic ferrules deliver 0.2 dB typical insertion loss and >38 dB return loss over 1000 mating cycles, freeing the installer from frequent re-termination. Not suited for single-mode runs or links beyond OM3 bandwidth limits.

Βασικά χαρακτηριστικά

  • OM3 core supports 10 gigabit multimode transmission
  • Duplex LC-ST connectors link switches and servers
  • 0 mm PVC jacket protects the fibre
  • Typical insertion loss 0.2 dB, maximum 0.3 dB
  • Return loss exceeds 38 dB for clean signals

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

How do I connect the LC and ST ends without exceeding the 330 mm bend radius?

Route the 3.0 mm jacket with gradual curves, securing the cable so no bend is tighter than 330 mm; the ceramic ferrules then seat cleanly in LC and ST ports.

When should I replace this patch cord after repeated mating cycles?

Plan replacement after roughly 1000 insertion and removal cycles, as performance may degrade beyond that point.

What is the maximum insertion loss I can expect on a 10 Gbps link at 850 nm?

The cable specifies a maximum insertion loss of 0.3 dB, with a typical value of 0.2 dB at 850 nm.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.